Filter
Top Products
33
RQT7237
Editing
[Note]
≥ The disc’s available recording time may not increase after
erasing short programs.
≥ Computer data cannot be erased.
≥ The available recording time on DVD-R does not increase when
you erase programs.
The lock symbol
appears when the
program is write-
protected.
Press [2] to set
protection and press
[ENTER].
[Note]
≥ Use [6], [5] and slow-motion
(
➜
page 20)
to find the start and end points.
≥ Play pauses if the end of the program is reached during this procedure.
≥ You may not be able to specify points within 3 seconds of each other.
≥ You cannot specify an end point before a start point.
≥ You cannot specify points on still pictures in the program.
≥ The disc’s available recording time may not increase after erasing short segments.
Repeat to enter other sections.
Press [3, 4] to
select “Exit
”
and
press [ENTER].
Press [2] to
select “Erase
”
and press
[ENTER].
Press [3, 4] to select “Next
”
and press [ENTER], then press [2] to
select “Erase
”
and press [ENTER].
Press [2] to select
“Divide
”
and press
[ENTER].
The program is divided.
0:19 SPRemaining Recording Time
Shorten Segment
Corresponding PLAY LIST will also be erased.
Erase Cancel
RETURN
ENTER
SELECT
DIRECT NAVIGATOR
No DATECH TIME EDITTITLE
01
4
02 6
03
13
3
3
1
1
1
1
1
ENTER
0
~
9
No
TOTAL 3
SELECT
RETURN
Shorten
Segment
0 : 00 . 01
Start
– – : – – . – –
End
3
Start
End
Next
Exit
0 : 00 . 01
PLAY
03
RETURN
ENTER
SELECT
N
S
0 : 00 . 01
Start End
3
Start
End
Next
Exit
0 : 10 . 15
RETURN
ENTER
SELECT
0 : 10 . 15
N
S
Shorten
Segment
03
3
Divide Program
Divide Cancel
RETURN
ENTER
SELECT
Press [2] to
select “Erase
”
and
press [ENTER].
The program is erased.
Press [ENTER] at
the end point of the
section you want to
erase.
Press [3, 4] to
select “Exit
”
and press
[ENTER].
Once you divide the program,
it will not be restored to the original.
[Note]
≥ The divided programs retain the title and CPRM property (➜ page
53) of the original program.
≥
A very small portion of the recording preceding the division point
may be lost.
≥ It is not possible to carry out Divide Program in the following cases:
–when the program is extremely short.
–when the total number of programs is more than 99.
To confirm the division point
Press [3, 4] to select “Preview” and press [ENTER]. (Play will
begin from a point 10 seconds prior to and after the division
point.)
To change the division point
Restart play and press [3, 4] to select “Divide”, then press
[ENTER] at the point you want to change.
9 : 00 PM
Auto action
6/20 WED
11 : 00 PM
USJ
6/20 WED
6/20 WED 10 : 00 AM
Dinosaur
Press [ENTER] at
the point you want
to divide the
program.
Press
[ENTER] at
the start point
of the section
you want to
erase.