Filter
Top Products
7
RQT7237
Setting up
3 Press [3, 4] to select “Channel” and
press [1].
4 Press [3, 4] to select “Antenna Sys-
tem” and press [ENTER].
5 Press [3, 4] to select “TV” or
“CATV” and press [ENTER].
The screen shown in step 3 reappears.
6 Press [3, 4] to select “Auto Channel
Setting” and press [ENTER].
7 Press [ENTER].
Auto setting starts. This takes a few minutes. (To stop auto
channel setting, press [RETURN].)
If you have not set the clock, the unit will carry out Auto Clock
Setting. The time is displayed when finished.
8 Press [ENTER] to end the setting.
≥After carrying out Auto Channel Setting, make sure you re-set
VCR Plusi guide channel (➜page 8) and Channel Caption
(➜page 47).
Notes on Auto Clock Setting
≥If you connect the unit through a cable TV box or DSS receiver
(➜page 49) and the Auto Channel Setting is not able to find a
local PBS station, the Auto Clock Setting will not work properly. If
there is no local PBS channel in your area, set the clock manually.
≥If the time was not set correctly, use manual clock setting or time
zone adjust.
≥DST, Daylight Saving Time, shows the summertime setting.
≥TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST (Eastern Standard Time) = GMT s5
CST (Central Standard Time) = GMT s6
MST (Mountain Standard Time)= GMT s7
PST (Pacific Standard Time) = GMT s8
AST (Alaska Standard Time) = GMT s9
HST (Hawaii Standard Time) = GMT s10
For other areas: xx hr
Adjust the time zone (s1 or r1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.
1 Press [SETUP] to show the menus.
2 Press [3, 4] to select “Set Up” and
press [1].
3 Press [3, 4] to select “Time Zone
Adjust” and press [ENTER].
4 Press [3, 4] to select “s1”, “0”, or
“r1” and press [ENTER].
The “Set Up” screen (➜ step 2) reappears.
1 Press [SETUP] to show the menus.
2 Press [3, 4] to select “Set Up” and
press [1].
3 Press [3, 4] to select “Manual Clock
Setting” and press [ENTER].
4 Press [2, 1] to select the item you
want to change and press [3, 4] to
change the setting.
MONTH(-)DAY(---)YEAR(-)HOUR (12-hour display)
^>TIME ZONE()DST()MINUTE(J
DST (Daylight Saving Time): ON or OFF
If you select “ON”, the clock is advanced one hour starting
at 2 a.m. on the first Sunday in April and ending at 2 a.m.
on the last Sunday in October.
TIME ZONE (➜left):
EST()CST()MST()PST()AST()HST
(s5) (s6) (s7) (s8) (s9) (s10)
^---------------------------------------------------------------------------------J
5 Press [ENTER].
The clock starts.
[Note]
When you change the time zone, the recording times for programs
recorded before the time zone was changed also change to corre-
spond to the new time zone.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
Add or delete channels if necessary channels are not set or unnec-
essary channels are set.
While this unit is receiving the antenna signal (but not during
recording):
1 Press the numbered buttons to select
a channel.
e.g., “5”: [0] ➜ [5]
“15”: [1] ➜ [5]
“115”: [100] ➜ [1] ➜ [5]
≥You can also use [W, X, CH]
when you are going to delete a
channel.
2 Press [ADD/DLT].
The channel is deleted if it was set or added if it was not set.
e.g.,
Repeat steps 1 and 2 as necessary.
Time Zone Adjust
Antenna System
Auto Channel Setting
Channel Caption
Preset Channel Caption
MlChlCti
CATV
Set Up
Channel
SETUP
SETUP
Set Up
Channel
Antenna System
TV
CATV
SETUP
Set Up
Disc
Video
Adi
Channel
Auto Channel / Clock Setting
Connect antenna cable and if you use a
cable box, tune it to your local PBS CH
then...
Please push the ENTER key.
SETUP
Disc
Set Up
Time Zone Adjust
j1
0
i1
Channel
Manual Clock Setting
Adding and deleting channels
SETUP
Disc
Video
Adi
Set Up
Manual Clock Setting
/ :
/
SAT AM
MONTH DAY YEAR
HOUR MINUTE
1
1
12 00
2000
DST TIME ZONE
OFF
EST
Channel
Unit’s display
CHANNEL 15 DELETED