Filter
Top Products
21
LIGHT
ASPECT
MUTE TV/VIDEO
VCR
DVD
AUX
RCVR
DBS
TV
DTV
CBL
CH
POWER
POWER
Power ON / OFF
Push the Power button to turn the projection TV ON,
from Stand-by mode.
The projection TV must first be switched on at the wall
outlet and the Power switch.
The Power Indicator will blink Green.
Approximately 10 seconds
The Power Indicator will become Green.
Example: The screen above is display for a while after
the projection TV is turned on. (Setting
condition is an example.)
Push the Power button to turn the projection TV to
Stand-by mode.
The Power Indicator will become Orange.
Approximately 90 seconds
The Power Indicator will become Red.
POWER
LED
No illuminated
Red
Green
Green blink
Orange blink
ACTION
Power – OFF
Stand – by
Power – ON
Power – ON
(approximately 10 seconds after)
Power – OFF (by the remote control)
(approximately 90 seconds after)
Power (ON / OFF) button
STEREO
SAP
MONO
NORMAL
CH123
The Power Indicator
LAMP TEMP
Remote Control Sensor
R-STANDBY
G-POWER ON
POWER
Note:
Even when the main power switch (FUNCTION SWITCH) is turned off, and the POWER indicator is not lit, the projection
TV is not completely cut off from the power if the power cable is still plugged in.