Panasonic PT 52DL52 CRT Television User Manual


 
13
Conversion adapter (if necessary)
Audio
RGB
D-SUB 15P
2 × RCA plug
PC cable
(supplied)
K1HA30DA0003 (2 m)
Connect a cable that matches
the audio output terminal on the computer.
PC INPUT
INPUT 4
VIDEO
L-AUDIO-R
COMPUTER
Installation
How to connect the PC Input Terminals
Signal Names for D-SUB 15P Connector
Pin Layout for PC Input
Terminal
Pin No.
1
2
3
4
5
Pin No.
6
7
8
9
10
Pin No.
11
12
13
14
15
Signal Name
R
G
B
GND (Ground)
GND (Ground)
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Signal Name
GND (Ground)
SDA
HD / SYNC
VD
SCL
1
678
3
9
45
10
15 14 13 12 11
2
Notes:
(1) The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible, you will
need to make setting changes to the computer at the time of connection.
(2) Some PC models cannot be connected to the set.
(3) There is no need to use an adapter for computers with PC / AT compatible D-SUB 15P terminal.
(4) The computer shown in the illustration is for example purposes only.
(5) Additional equipment and cables shown are not supplied with this set.
(6) The picture will become dark if a PC signal with a vertical scanning frequency of 62 Hz is input. To obtain the optimum
picture quality with the projection TV, a vertical scanning frequency of 60 Hz is recommended.
(7) Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified
frequency range.
Digital and analog RGB signals that can be input
The table below lists the different types of digital and analog RGB signals that can be input.
If a signal which differs greatly from any of the types listed below is input, the picture
image may not be displayed correctly, or a black background may displayed.
Note:
The number of dots for this set is 800 × 600 for NORMAL display. Number of dots other than 800 × 600 in the above data,
will be converted to 800 × 600 (with the exception of MAC 16, which will be displayed in 832 × 624 dots).
Display mode name No. of dots (H
××
××
× V)
Horizontal scanning Vertical scanning DIGITAL PC INPUT
frequency (kHz) frequency (Hz) IN (Analog)
VGA400 640 × 400 31.5 70.1
∗∗
VGA480 640 × 480 31.5 59.9
∗∗
SVGA 800 × 600 37.9 60.3
∗∗
XGA 1024 × 768 48.4 60.0
∗∗
MAC16 832 × 624 49.7 74.6
720p 1280 × 720 45.0 60.0
Mark:
Input signal can be displayed.