Filter
Top Products
15
RQT9464
Enjoying sound from all speakers and various
sound effects
≥The following sound effects/modes may not be available or have no effect with some sources, or when headphones are used (> 16).
≥You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the
sound effects/modes off.
1 Press [SOUND] several times to select the mode.
≥You can also press [SOUND] and then [3, 4] to select the
mode.
≥The selected effect will only be displayed on the main unit.
2 While the selected mode is displayed
Press [2, 1] and select the desired setting.
∫
When only the supplied speakers are connected.
≥
Underlined items are the factory presets.
Press [SURROUND] several times to select the effect.
≥You can also press [SURROUND] and then [3, 4] to select the
mode.
≥The selected effect will only be displayed on the main unit.
When selecting the MANUAL effects below.
While “MANUAL” is displayed
Press [2, 1] and select the desired effect.
∫ When the optional surround, surround back speakers
(SB-HSX70) are connected with the optional Panasonic
wireless system SH-FX70.
When 1 or 2 optional Panasonic wireless system(s) SH-FX70 are
connected and the appropriate settings have been made in the
“EASY SETUP” the following sound effects will be available.
≥Underlined items are the factory presets.
Changing the sound modes
Available sound modes
Mode Setting
EQ:
(Equalizer)
You can select sound quality settings.
–FLAT(Flat): Cancel (no effect is added).
–HEAVY(Heavy):Adds punch to rock.
–CLEAR(Clear): Clarifies higher sounds.
–SOFT(Soft): For background music.
SUB W:
(Subwoofer
level)
This unit will change the settings for the
amount of bass depending on the source.
However you can also adjust the amount of
bass for the source being played.
–1 (Weakest effect)
–2
–3
–4 (Strongest effect)
≥The setting you make is retained, and
recalled every time you play the same type of
source.
W.S.:
(Whisper-mode
Surround)
You can enhance the surround effect for low
volume sound.
(Convenient for late night viewing.)
–ON
–OFF
OK
SOUND
SURROUND
-
CH SELECT
-
CH SELECT
SURROUND
SOUND
Enjoying surround sound effects
Available surround sound effects for 2.1 ch settings
Effect Setting
7.1CH VS*
1, 2, 4
:
You can enjoy 5.1/7.1-channel surround-like
effect using 2.1-channel speakers.
This function is effective only when playing
4.1 ch sources or above.
2CH STEREO:
You can play any source in stereo without the
surround sound effect.
DOLBY
VIRTUAL
SPEAKER*
3, 4
You can enjoy a surround sound effect similar to
5.1 ch (Dolby Digital or DTS) with any audio
source, using the included front speakers and the
subwoofer. You can also enjoy a surround sound
effect with stereo sources such as CDs.
REFERENCE
Standard mode
WIDE
≥This mode widens the acoustic field of the
front speakers. This has a good effect when
there is little space between the speakers.
Available surround sound effects for 4.1 ch or 6.1 ch
settings
Effect Setting
STANDARD: Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH: You can enjoy sound from the front speakers,
as well as the surround speakers even when
playing a 2-channel sound or non-surround
sound.
MANUAL:
– DOLBY PL II MOVIE*
4
:
Suitable for movie software, or the one recorded
in Dolby Surround. (except
[DivX]
)
– DOLBY PL II MUSIC*
4
:
Adds 5.1-channel effects to stereo sources.
(except
[DivX]
)
– S.SURROUND:
You can enjoy sound from all speakers with
stereo sources.
– 2CH STEREO:
You can play any source in stereo. Sound will be
output to the front speakers and the subwoofer
only and without the surround sound effect.
*1 7.1CH VS is not available when the audio source currently playing is 2.1 ch, 3.1 ch.
*2 The 7.1-channel surround-like effect will only function when playing 6 or more channel sources.
*3 Dolby Virtual Speaker is not available and “NOT CONDITIONAL” is displayed when the audio source currently playing is
3.1 ch, 3 ch, 1.1 ch or 1 ch.
*4 The effects do not work when audio is output from the HDMI AV OUT terminal.
≥“NOT CONDITIONAL” is displayed on the main unit if the setting is not active.
When the unit has been set for 4.1 ch or 6.1 ch output, it is not possible to select the sound effects for 2.1 ch or vice versa.
NOTE
TIPS
Getting started
SC-BTX70EGEB-RQT9464-B.book 15 ページ ２００９年４月９日 木曜日 午後２時５３分