Filter
Top Products
32
RQT9464
Network settings
Setting the connection speed
When the connection test results in “Fail” after the IP and
DNS-IP addresses are assigned, perform the following
settings.
After performing steps 1 – 4 (> 31)
5 Press [3, 4] to select “Connection Speed
Auto-Config” and press [2, 1] to select “Off”.
6 Press [3, 4] to select “Connection Speed
Setting” and press [2, 1] to select a
connection speed.
≥Select a connection speed in accordance with the
environment of the network connected.
≥When the settings are changed, the network connection
may be disabled depending on the device.
Testing of “Proxy Server Settings”
Always test the connection when new “Proxy Server
Settings” have been made.
1 While stopped
Press [BD/SD] to select “BD/DVD”.
2 Press [SETUP].
3 Press [3, 4] to select “Network Settings” and
press [OK].
4 Press [3, 4] to select “Proxy Server Settings”
and press [OK].
5 Press [3, 4] to select “Connection Test” and
press [OK].
“Testing...”: The test is in progress.
“Pass”: The connection is completed.
Press [RETURN] to exit.
“Fail”: Please check the connection and settings.
RETURN
Proxy Server Settings
Proxy Address
Proxy Port Number
OK
0
Connection Test
----
Initialize
Setting the proxy server
In most cases, default settings can normally be used
without making any changes.
Please use this setting when instructed to by your
Internet service provider.
After performing steps 1 – 4 (> left)
5 Press [3, 4] to select “Proxy Address” and
press [OK].
≥The text entry screen is displayed.
Text field: shows the text you have entered
6 Press [3, 4, 2, 1] to select a character and
press [OK].
Repeat this step to enter other characters.
≥Press [;PAUSE] to delete.
7 Press [∫STOP] when you complete the entry.
8 Press [3, 4] to select “Proxy Port Number”
and press [OK].
9 Enter numbers with the numbered buttons and
press [OK].
: Press [2, 1] to select “Yes” and press [OK].
≥The specified ports may be blocked and not be
able to be used depending on the network
environment.
In order to restore the default settings
After performing steps 1 – 4 (D left)
1) Press [3, 4] to select “Initialize” and press [OK].
2) Press [2, 1] to select “Yes” and press [OK].
Using the numbered buttons to enter characters
e.g., entering the letter “F”
1) Press [3] to move to the 3rd row.
2) Press [3] twice to highlight “F”.
3) Press [OK].
_
Proxy Address
Space
Finish
Delete
OK
RETURN
1
2
3
4
5
6
7
8
9
0
1234567890
ABC
DEF
abc
def
ghi
jkl
/=
%
+-*
#$&
<>@
mno
[]_
pqrs
()
tuv
{}
\ I
wxyz
“’:;
`^
.,
?!
JKL
MNO
PQRS
TUV
WXYZ
0 -- 9
GHI
~
0
Proxy Port Number
Input HTTP Proxy server port number and
press [OK]. The
deleted with [CANCEL]. The number will be
set to "0" if all characters are deleted and
[OK] is pressed.
Number
0
-
9
TIPS
1
2
4
1
2
3
4
A
B
C
D
E
F
G
H
I
3
3
def
3
def
3
def
Advanced operations
SC-BTX70EGEB-RQT9464-B.book 32 ページ ２００９年４月９日 木曜日 午後２時５３分