Filter
Top Products
27
RQT9464
If you connect this unit to a TV that has “HDAVI Control 2” or later
with an HDMI cable, you can operate this unit using buttons on
the TV remote control.
The buttons that you can use for this unit vary depending on the
TV. For details, refer to the operating instructions of the TV.
Use the remote control supplied with this unit if you cannot
operate this unit using buttons on the TV remote control.
≥The operation of this unit may be interrupted when you press
incompatible buttons on the TV remote control.
∫ Using the Control Panel
You can operate the playback with the
indicated controls.
∫ When you want to leave the TV on and set only this unit to standby mode
Press [Í] on this unit’s remote control and set to standby mode.
∫ When not using “HDAVI Control”
Set “VIERA Link” in the Setup menu to “Off”. (> 37)
Automatic input switching
When the following operations are performed, the television will
automatically switch the input channel and display the
corresponding action.
–When play starts on the unit
–When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
≥
[BD-V] [DVD-V] When playback stops, the TV will automatically
return to TV tuner mode.
≥When you switch the TV input to TV tuner mode, this unit will
automatically switch to “AUX”*
1
, “D-IN 1” (DIGITAL IN 1)*
1
or
“D-IN 2” (DIGITAL IN 2)*
2
.
≥This function does not work when the iPod selector (SIMPLE
mode) or iPod Video menu (EXTENDED mode) is chosen.
(> 29)
≥When [1PLAY] is pressed, the playback image is not
immediately displayed on the screen and it may not be
possible to watch the contents from where playback
started.
In this case, press [SKIP:] or [SEARCH6] to go
back to where playback started.
Automatic lip-sync function
(for HDAVI Control 3 or later)
Delay between audio and video is automatically adjusted,
enabling you to enjoy smooth audio for the picture (> 37, “Time
Delay”).
≥
This function works only when “BD/DVD”, “SD”, “USB”, “AUX”*
1
,
“D-IN 1” (
DIGITAL IN 1
)*
1
or “D-IN 2” (
DIGITAL IN 2
)*
2
is
selected as the source on this unit.
Power off link
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
≥This unit automatically turns off even during playback or any
other operation.
To continue audio playback even when the TV is turned off,
select “Video” in “Power Off Link” (> 37).
∫ Intelligent Auto Standby
Intelligent Auto Standby responsibly manages your power
consumption.
This function is available with a TV that supports “HDAVI
Control 4”.
≥If connected with a TV (VIERA) with the “Intelligent Auto
Standby” setting activated on the TV, when switching the TV
input, the unit will be automatically turned to standby. For
details please read the operating instructions of the TV.
≥When “Speaker selection” is set to “Home Cinema”, the
main unit will not automatically turn to standby.
One touch play
You can turn on this unit and the TV, and start play with a single
press of a button.
While the unit and the TV are in standby mode;
Press [1PLAY].
≥This unit’s speakers will automatically be activated. (> 26)
≥When [1PLAY] is pressed, the playback image is not
immediately displayed on the screen and it may not be
possible to watch the contents from where playback
started.
In this case, press [SKIP:] or [SEARCH6] to go
back to where playback started.
*1
“AUX” or “D-IN 1” works depending on the “TV AUDIO”
setting (B 26, Setting the TV audio for VIERA Link “HDAVI
Control”).
*2
“D-IN 2” works depending on the “CABLE/SAT AUDIO”
setting (B 26, Setting the TV audio for VIERA Link “HDAVI
Control”).
NOTE
NOTE
Easy control only with VIERA remote control
Using the START menu to operate this unit
By using the TV remote control, you can play media using the
START menu.
1 Press the button for VIERA Link
on the TV remote control.
2 Select the home theatre.
≥The START menu is displayed
3 Select the desired items on the
START menu (> 14).
Using the option menu to operate this unit
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu (for BD-Video and
DVD-Video) or Pop-up Menu (for BD-Video).
≥This works only during “BD/DVD” or “SD” playback and
resume modes.
1 Press [OPTION].
≥You cannot use the option menu while
the Top Menu for BD-Video or
DVD-Video is displayed.
≥This can also be displayed by using the
VIERA menu screen.
2 Select an item, then press [OK].
Control Panel
Control Panel is displayed. Follow the
indications on the screen (
>
below).
Screen Aspect (> 18)
Top Menu
[BD-V] [AVCHD]
[DVD-V]
Top menu is displayed.
Menu [DVD-V] Menu is displayed.
Pop-up Menu [BD-V] Pop-up menu is displayed.
Rotate RIGHT [JPEG] Rotate the still picture.
Rotate LEFT [JPEG]
Zoom in [JPEG] Enlarge or shrink the still picture.
Zoom out [JPEG]
≥Depending on the menu, some button operations
cannot be performed from the TV’s remote control.
≥You cannot input numbers with the numbered buttons
on the TV’s remote control ([0] to [9]). Use this unit’s
remote control to select the playlist etc.
e.g., [BD-V]
Menu
To Others
Playback Disc
Top Menu
Home Cinema
START
BD-Video
Input Selection
Sound(Equalizer)
Network
OK
RETURN
OPTION
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
e.g., [BD-V]
e.g.
NOTE
TV
SC-BTX70EGEB-RQT9464-B.book 27 ページ ２００９年４月９日 木曜日 午後２時５３分