Filter
Top Products
16
RQT9951
█ Menu 4 (HDMI)
HDMI
HDMI STATUS
To show HDMI information
Example:
A
HDMI INFORMATION
CONNECTED STATE CONNECTED
AUDIO STREAM PCM
MAX CHANNEL 2ch
VIDEO FORMAT 720p
COLOUR SPACE YCbCr 4:4:4
A
3
5
2
4
Connection status
B Shows the output signal type.
(When “OFF” is selected in “AUDIO OUT”
(
Z
24, “HDMI” menu), “---” will be shown.)
C Shows the number of audio channels.
D (
Z
below, “VIDEO FORMAT”)
E (
Z
below, “COLOUR SPACE”)
HD ENHANCER
This works when the HDMI connection is being used
with “VIDEO PRIORITY” (
Z
24, “HDMI” menu) set to
“ON”.
To sharpen the “720p”, “1080i” and “1080p” picture
quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being used
with “VIDEO PRIORITY” (
Z
24, “HDMI” menu) set to
“ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output as,
high-definition video.)
480p/576p/720p/1080p (progressive)
480i/576i/1080i
(interlaced)
The numbers shown depend on the disc being
played. One of the above numbers is shown.
• If the picture is distorted, press [CANCEL DEL] until
the picture is shown correctly. (The output will return to
“480p”/“576p”.)
COLOUR SPACE
This works when the HDMI connection is being used
with “VIDEO PRIORITY” (
Z
24, “HDMI” menu) set to
“ON”.
To select suitable picture colour with your TV
YCbCr 4:2:2
YCbCr 4:4:4
RGB
• An “
*
” mark will appear if compatible with your TV.
• If the picture colour is distorted, press [CANCEL DEL]
until the picture colour is shown correctly.
Radio
Preparation
Press [RADIO/AUX] to select “FM” or “AM”.
Manual tuning
Press [3] or [5] to tune in to the station.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
“ ” is shown when a stereo broadcast is being received.
Using the main unit
1 Press [TUNE MODE] to select “MANUAL”.
2 Press [
2
/
3
] or [
5
/
6
] to tune in to the
station.
Improving the sound quality
When “FM” is selected
1 Press [PLAY MODE] to select “FM MODE”.
2 Press [
Y
,
U
] to select “MONO” and then press
[OK].
To cancel, select “STEREO”.
“MONO” is also cancelled when you change the
frequency.
Memory presetting
You can preset up to 30 FM and 15 AM stations.
█ Automatic presetting
1 Press [PLAY MODE] repeatedly to select
“A.PRESET”.
2 Press [
Y
,
U
] to select “LOWEST” or “CURRENT”.
LOWEST Tuning begins from the lowest
frequency.
CURRENT Tuning begins from the current
frequency.
3 Press [OK] to start presetting.
The tuner presets all the stations it can receive into
the channels in ascending order.
To cancel, press [8].
SC-VKX65GAGS_RQT9951-B_En.indd 16SC-VKX65GAGS_RQT9951-B_En.indd 16 8/18/2014 3:31:35 PM8/18/2014 3:31:35 PM
printing rev.1
Confidential
Until:
29 Aug 2014