Filter
Top Products
22
RQT9951
External equipment
Preparation
• Disconnect the AC mains lead.
• Switch off all equipment and read the appropriate
operating instructions.
Using the auxiliary input
You can connect the TV and listen to the audio through
this system.
1 Connect the TV to this system.
(
Z
7, “Alternative connection to a TV”)
2 Press [RADIO/AUX] to select “AUX 1”.
Note:
• You can also connect other equipment (such as Blu-ray
Disc player, DVD recorder, VCR, etc.) to the AUX 1 terminal
of this system.
• Sound distortion can occur when you use an adaptor.
Connect to a portable audio equipment
You can play music from a portable audio equipment.
Preparation
• Switch off the equaliser (if any) of the portable audio
equipment to prevent sound distortion.
• Decrease the volume of the system and the portable
audio equipment before you connect or disconnect the
portable audio equipment.
RADIO/AUX
TUNE
MODE
OPEN/CLOSE
AUX IN 2
1 Connect the portable audio equipment.
Plug type: Ø 3.5 mm stereo
2 Press [RADIO/AUX] to select “AUX 2”.
3 Play the portable audio equipment.
Portable audio
equipment
(not supplied)
Audio cable
(not supplied)
Others
Bluetooth
®
standby
This function automatically switches on the system when
you establish a Bluetooth
®
connection from a paired
device.
1 Press [ , USB] (main unit: [ /USB, –PAIRING]) to
select “BLUETOOTH”.
2 Press [PLAY MODE] to select “STANDBY MODE”.
3 Press [
Y
,
U
] to select “ON STANDBY MODE” and
then press [OK].
To cancel, select “OFF STANDBY MODE”.
SC-VKX65GAGS_RQT9951-B_En.indd 22SC-VKX65GAGS_RQT9951-B_En.indd 22 8/18/2014 3:31:35 PM8/18/2014 3:31:35 PM
printing rev.1
Confidential
Until:
29 Aug 2014