Filter
Top Products
7
RQT9951
Alternative connection to a TV
To listen to the TV audio on this system, connect the
audio cable to this system.
AUX 1 terminal
5 Connect the AC mains lead.
(For the AC mains plug of three pins)
READ THE “Note on AC mains lead” BEFORE
CONNECTION.
Do not use an AC mains lead from other equipment.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
4 Connect the TV to this system.
Connect either HDMI cable or video cable to this
system.
HDMI terminal
HDMI IN
This connection provides the best picture quality.
• Set “VIDEO PRIORITY” to “ON” (
Z
24, “HDMI”
menu).
• Set “VIDEO FORMAT” in Menu 4 (HDMI) (
Z
16).
Note:
• Use the supplied HDMI cables.
• If you use an optional HDMI cable, use High Speed HDMI
Cables. Non-HDMI compliant cables cannot be utilised.
• It is recommended that you use Panasonic HDMI cable.
When outputting 1080p signal, use HDMI cables 5.0 m or
less.
• For TV with more than one HDMI terminal, refer to the TV’s
operating instructions for the connection.
VIDEO OUT terminal
Note:
Do not make the video connections through the VCR.
The video cannot show correctly because of copy-guard
protection.
TV
(not supplied)
Video cable
To household
mains socket
HDMI cable
TV
(not supplied)
TV
(not supplied)
Audio cable
(not supplied)
SC-VKX65GAGS_RQT9951-B_En.indd 7SC-VKX65GAGS_RQT9951-B_En.indd 7 8/18/2014 3:31:33 PM8/18/2014 3:31:33 PM
printing rev.1
Confidential
Until:
29 Aug 2014