Filter
Top Products
24
RQT9951
“AUDIO” menu
DOLBY DIGITAL
BITSTREAM
PCM
DTS
BITSTREAM
PCM
For the Middle East and South Africa
MPEG
BITSTREAM
PCM
Select “BITSTREAM” when the equipment can
decode the bitstream (digital form of multi-channel
data). If not, select “PCM”. (If the bitstream output to
the equipment without a decoder, there can be high
levels of noise output that can do damage to your
speakers and hearing.)
DYNAMIC RANGE
ON: Adjust for clarity even when the volume is low.
The range between the lowest and the highest
sound levels is compressed. Convenient for late
night viewing. (Only works with Dolby Digital.)
OFF
“DISPLAY” menu
LANGUAGE
Select the language for the on-screen messages.
ENGLISH FRANÇAIS ESPAÑOL
PУCCKИЙ
“HDMI” menu
VIDEO PRIORITY
ON: When using the HDMI AV OUT terminal for
video output. The resolution of the video output
from the HDMI AV OUT terminal is optimised
according to the capability of the connected
equipment (e.g. TV).
OFF: When not using the HDMI AV OUT terminal for
video output.
AUDIO OUT
ON: When audio output is from the HDMI AV OUT
terminal. (Depending on the capabilities of the
connected equipment, audio output may differ
from the audio settings of this system.)
OFF: When audio output is not from the HDMI AV
OUT terminal. (The audio is output using the
settings of this system.)
RGB RANGE
STANDARD
ENHANCED:
When the black and white images are
not distinct.
“OTHERS” menu
SLIDE SHOW TIME
To change the slideshow time.
1 SEC to 15 SEC (in 1-unit)
15 SEC to 60 SEC (in 5-unit)
60 SEC to 180 SEC (in 30-unit)
“3 SEC” is the factory preset.
EASY SETUP
SET: Shows the EASY SETUP settings.
DVD-VR/DATA
Select to play only DVD-VR or DATA format.
DVD-VR: To play video on DVD-R/RW.
DATA: To play data files on DVD-R/RW.
SCREEN DIMMER
This is to prevent burnt mark on the TV screen.
OFF
WAIT 5 MIN: If there is no operation for 5 minutes, the
picture becomes grey. The TV screen
will go back to the normal position when
you do some operations. (This does not
apply during video playback.)
DEFAULTS
This returns all values in the SETUP menus to the
default settings.
RESET
The password screen is shown if “RATINGS”
(
Z
23, “RATINGS”) is set. Input the same password
and then press [OK], then switch off the system and
switch on again.
SC-VKX65GAGS_RQT9951-B_En.indd 24SC-VKX65GAGS_RQT9951-B_En.indd 24 8/18/2014 3:31:36 PM8/18/2014 3:31:36 PM
printing rev.1
Confidential
Until:
29 Aug 2014