Filter
Top Products
11
RQT9951
█ Pairing a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (
Z
below, “Disconnecting a device”).
1 Press [ , USB] (main unit: [ /USB, –PAIRING]) to
select “BLUETOOTH”.
If “PAIRING” is shown, continue with step 4.
2 Press [PLAY MODE] to select “PAIRING”.
Or press and hold [
/USB, –PAIRING] on the main
unit until “PAIRING” is shown. Continue with step 4.
3 Press [
Y
,
U
] to select “OK? YES” and then press
[OK].
4 Select “SC-VKX65” from the Bluetooth
®
menu of
the device.
If prompted for a passkey, input “0000”.
The device connects with this system automatically
after pairing is complete.
The name of the connected device is shown for a few
seconds.
Note:
You can pair up to 8 devices with this system. If a 9th device
is paired, the device that has not been used for the longest
time will be replaced.
█ Connecting a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (
Z
below, “Disconnecting a device”).
1 Press [ , USB] (main unit: [ /USB, –PAIRING]) to
select “BLUETOOTH”.
“BLUETOOTH READY” is shown.
2 Select “SC-VKX65” from the Bluetooth
®
menu of
the device.
The name of the connected device is shown for a few
seconds.
3 Start playback on the device.
Note:
• A device must be paired to connect.
• The system can only connect to one device at a time.
• When “BLUETOOTH” is selected as the source, this system
will automatically try to connect to the last connected
device. (“LINKING” is shown during this process.)
• Press [FL DISPLAY] repeatedly to view the name and profile
of the connected device.
█ Disconnecting a device
1 Press [ , USB] (main unit: [ /USB, –PAIRING]) to
select “BLUETOOTH”.
2 Press [PLAY MODE] repeatedly to select
“DISCONNECT?”.
3 Press [
Y
,
U
] to select “OK? YES” and then press
[OK].
“BLUETOOTH READY” is shown.
To cancel, select “OK? NO”.
Using the main unit
Press and hold [
/USB, –PAIRING] until “PAIRING” is
shown.
Note:
A device is disconnected when you:
• Select a different source.
• Move the device out of the maximum range.
• Disable the Bluetooth
®
transmission of the device.
• Switch off the system or the device.
Media playback
(
Z
25, “Playable media”)
Basic playback
Preparation
To view the picture, switch on your TV and change its
video input mode (example: HDMI, AV 1, etc.).
Play
Press [4/9].
Stop
Press [8] during playback.
The position is memorised.
“RESUME STOP” shows on the
screen.
Press again to stop fully.
Pause
Press [4/9] during playback.
Press again to continue playback.
Skip track or
content
Press [2] or [6] (main unit:
[2/3] or [5/6]).
Search
(during
playback)
Slow-motion
(during pause)
Press [3] or [5].
Or
Press and hold [2/3] or
[5/6] on the main unit.
• Up to 5 speeds.
• Press [4/9] to continue normal
playback.
View
frame-by-frame
(during pause)
Press [
e
] or [
E
] to go to the
previous or next frame.
Press [
E
] to go to the next frame.
View
information
Press [FL DISPLAY] to show
available information on the display
panel.
Note:
• For Bluetooth
®
, only Play, Stop, Pause, Skip and Search
can be selected.
• Depending on the type of media, some operations are
restricted.
SC-VKX65GAGS_RQT9951-1B_En .indd 11SC-VKX65GAGS_RQT9951-1B_En .indd 11 8/21/2014 11:43:58 AM8/21/2014 11:43:58 AM
printing rev.1
Confidential
Until:
29 Aug 2014