Filter
Top Products
25
Preset Operation
Automatic Tune
This television has been factory tuned to all major city channels. Use the automatic tuning procedure only if you
wish to reset ALL Programme Location Numbers. Refer to “Manual Tune” on page 26 if you only want to retune one
or two Programme Location Numbers.
The television should be switched ON and the TV/AV Switch set to TV.
When you start the automatic search, the television will automatically search for television broadcasts through both
VHF bands and the UHF band. During this process all of the available television broadcast channels will be
automatically allocated to sequential Programme Number locations starting with location 1.
Auto Tuning Using the Front Panel Controls
1. Open the front panel door .
2. Push the PRE. Button once.
3. Press the Volume Up ( + ) Button to start the Auto Tune. Auto Tune will automatically allocate each
received broadcast signal to a sequential Programme Number. The operation will cease when all
available channels have been tuned.
Programme Number
Channel Number
Tuning Indicator
(Only shown while
tuning)
4. Return the television to normal operation by pushing the PRE. Button seven times.
Auto Tuning Using the Remote Control
1. Push the MAIN MENU Button.
2. Select the PRESET Menu using the Left ( ) or Right ( )
Button. When the Preset symbol is highlighted, the Preset
Menu has been selected.
Push the Down ( ) Button to access the AUTO TUNE
option.
3. Press the Right ( ) Button to start the Auto Tune. Auto Tune
will automatically allocate each received broadcast signal to a
sequential Programme Number. The operation will cease
when all available channels have been tuned.
4. Return the television to normal operation by pushing the MAIN
MENU Button twice.
After you have finished with the automatic tuning and returned to normal viewing, push the Programme
Number Up ( ) Button to confirm the tuning condition for each Programme Number. If a Programme
Number is unwanted, it is possible to “SKIP” or bypass that Programme Number. Please refer to “SKIP”
setting details on page 29.
MAIN MENU
PRESET
1 PRESET
AUTO TUNE
MANUAL TUNE
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 0
1
CH 1
AUTO TUNE