Panasonic TX-68PS12A CRT Television User Manual


 
29
Preset Operation
Skip Operation
This option allows you to “SKIP” (bypass) the unused or undesired Programme Numbers. The Function is only
applicable when the Programme Number Up or down buttons are pressed. The use of the remote control Direct
Programme Number Buttons overrides the Skip function. The SKIP function is not available if FAVORITE CH has
been selected.
Using Front Panel Controls
1. Open the front panel door.
2. Push the PRE. Button five times.
3. Select the Programme Location Number you want to skip using the
front panel Programme Number Up or Down Buttons.
4. Press the Volume Up ( + ) or Volume Down ( - ) Button to switch to
SKIP ON.
5. When you are satisfied with your selection you can
-Skip more Programme Location Numbers by repeating steps 3 and 4.
-Return the television to normal operation by pushing the PRE. Button
three times.
Using the Remote Control
1. Push the MAIN MENU Button.
2. Select the PRESET Menu using the Left ( ) or Right ( ) Button. When the Preset symbol is
highlighted, the Preset Menu has been selected.
3. Push the Down ( ) Button to access the SKIP option.
4. Select the Programme Location Number you want to skip using the Remote Control Programme
Number Up or Down Buttons.
5. Push the Left ( ) or Right ( ) Button to switch to SKIP ON.
6. When you are satisfied with your selection you can
- Skip more Programme Location Numbers by repeating steps 4 and 5.
- Return the television to normal operation by pushing the MAIN MENU Button twice.
12
CH 12
FINE TUNE
12 PRESET
AUTO TUNE
MANUAL TUNE
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 12
GEOMAGNETIC 0
How to Cancel the Skip
To cancel the Skip function follow the procedure outlined above. Use the appropriate button to switch to
SKIP OFF.