Filter
Top Products
31
All televisions, particularly large screen televisions, are affected by the earth’s Magnetic Field. The symptom may
show up as blurring of colours or strange discoloured patches. The location and direction of the television can add to
the interference problem.
The Geomagnetic Correction option can be used to overcome some of these effects.
Geomagnetic Correction Using the Front Panel Controls
1. Open the front panel door.
2. Push the PRE. Button seven times.
3. Use the front panel Programme Number Up or Down Buttons to adjust the picture for best colour. Pay
special attention to the four corners of the picture. The Geomagnetic Correction has a range of -9 to +9.
4. When you are satisfied with your adjustment you can return the television to normal operation by
pushing the PRE. Button once.
Geomagnetic Correction Using the Remote Control
1. Push the MAIN MENU Button.
2. Select the PRESET Menu using the Left ( ) or Right ( )
Button. When the Preset symbol is highlighted, the Preset Menu
has been selected.
3. Push the Down ( ) Button to access the GEOMAGNETIC
option.
4. Use the Remote Control Programme Left ( ) or Right ( )
Button to adjust the picture for best colour. Pay special attention
to the four corners of the picture. The Geomagnetic Correction
has a range of -9 to +9.
5. When you are satisfied with your adjustment you can return the
television to normal operation by pushing the MAIN MENU
Button twice.
Special Note
1. If the adjustment still allows coloured patches on the screen, turn the mains power off for about 30
minutes.
2. In some cases the geomagnetic adjustment will not completely eliminate the interference. In this
situation it will be necessary to relocate the television.
MAIN MENU
PRESET
1 PRESET
AUTO TUNE
MANUAL TUNE
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 0
Preset Operation
GEOMAGNETIC