Filter
Top Products
- 6 -
TC-14B10P / TC-20B10PService Adjustments and Calibrations
HOW TO OPERATE THE DAC CONTROL MX5Y
FUNCTIONS ADJUSTMENTS
1- SERVICEMAN MODE
1.1- TO ENTER CHQ MODE (SERVICE):
Set the OFF TIMER to 30 using the remote control
and adjust minimum volume at the TV panel. Press
simultaneously RECALL at the remote control and
VOL(-) at the tv panel. The white screen will appear
on receiver. Press RECALL again and the letters
CHQ will appear magenta with a blue background.
1.2- To alternate between CHQ modes, press 1 or 2
at the remote control (CHQ1 to CHQ5)
1.3- TO EXIT CHQ MODE (SERVICE):
Press N at the remote control, or just turn off the TV
using the remote control.
CHQ1
1.1- Press3or 4 to alternate the existing options: from
OP1 to OP6.
1.2- To change the data inside each sub-item press
VOL(+) or VOL(
_
) (the letter will be red). To memorize
the modifications press 0 (the letter will come back
to green).
OP1 (Colour system)
This option alternates between colour systems that will be
available within the TV set.
OP1=0 auto/PAL-M/NTSC (mod. Binorma)
OP2=1 auto/PAL-M/PAL-N/NTSC (mod. Trinorma)
OP1=2 Pal-M (mod.Pal-M)
OP2 (Game Function)
This option may turn the function GAME on/off.
OP3 (PANASONIC DEMO)
This option may turn the function DEMO on/off.
OP4 (TELE-TEXT) - not available
This option may turn the function TELE-TEXT on/off.
OP5 (SASO) - not available
This option may turn the function SASO on/off.
OP6 (NOISE MUTE) - not available
This operation may turn the function NOISE MUTE on/off.
Without the blue screen, it cuts off the noise when you are
working on a channel without reception or very weak signal.
CHQ2
1.1- Press 3 or 4 to alternate between existing positions
like the sequence below:
To change between the data of each sub-item press
VOL(+) or VOL(
_
), the letter will stay green. No need
to memorize.
COLOUR ..........................USER
SUB-COLOUR .................CALIBRATION
TINT .................................USER
SUB-TINT ........................CALIBRATION
BRIGHT ........................... USER
SUB-BRIGHT .................. CALIBRATION
CONTRAST ..................... USER
SUB-CONTRAST ............ CALIBRATION
PURITY ............................USER
SUB-PURITY ...................CALIBRATION
CHQ3
1.1- Press 3 or 4 to alternate between the existing
options, as sequence below:
To change between the data in each sub-item press
VOL(+) or VOL(
_
), the letter will stay green. No need
to memorize.
HC ....................... HORIZONTAL CENTERING
VC ....................... VERTICAL CENTERING
V ALT .................. VERTICAL HEIGHT
CHQ4
1.1- Press 3 or 4 to alternate between the existing
options, as sequence below:
To change between the data in each sub-item press
VOL(+) or VOL(
_
), the letter will stay green. No need
to memorize.
AFT ..................... AFT CALIBRATION
VID................ VIDEO LEVEL CALIBRATION
RF..............AGC-RF CALIBRATION
CHQ5
1.1- Press 3or 4 to alternate between the existing
options, as sequence below:
To change between the data in each sub-item press
VOL(+) or VOL(
_
), the letter will stay green. No need
to memorize.
CHQ5 Options:
B-CUT...........BLUE LOW LIGHT CALIBRATION
G-CUT.......... GREEN LOW LIGHT CALIBRATION
R-CUT...........RED LOW LIGHT CALIBRATION
B-DR......... BLUE HIGHT LIGHT CALIBRATION
R-DR......... RED HIGH LIGHT CALIBRATION
SUB-BR........ SUB BRIGHT CALIBRATION
BRIGHT........ BRIGHT CALIBRATION