Filter
Top Products
15
Getting started
●
First Time Setup
OK
ANT/Cable setup
Select signal type (“Over-the-Air”)
Select
Next
ANT/Cable setup
Step 3 of 5
Back
How does the TV receive its
programming content?
Cable service(No Box)
Over-the-Air
Return
Select
OK
Select “Auto program” and start scanning
EXIT
Exit
Select
Auto program
Skip
Step 4 of 5
Back
Start scanning for available
channels in your area?
Auto program
Next
Return
Auto scan may take 20 minutes or more to complete.
0%
Select
OK
Scanning starts
Auto program
Step 4 of 5
This may take some time to
complete.
Status: Scanning..
Analog Channels: 1
Digital Channels: 3
Return
2%
Complete First time setup
Congratulations! You are done.
Congratulations!
Setup is complete.
Enjoy your Panasonic VIERA TV.
Press OK to exit.
Back EXIT
■
Press to exit from
a menu screen
■
Press to go back to
the previous screen
To watch TV via a Cable box, Satellite receiver, or any other source (DVD,
DVR, gaming device, etc.), press the [INPUT] button and select the appropriate
input.
Note
●
If you turn off the TV by pulling out the power cord before completing “First time setup”, “First time setup” will launch
again when you next turn on the TV.
On the other hand, if you turn off the TV with the POWER button on the TV or remote control, this procedure will not
launch again on your next power on.
●
You can repeat “First time setup” by selecting “Reset to defaults” in the “Setup” menu (p. 33)
●
After “First time setup”, you can also change “Language” and “ANT/Cable setup” from the “Setup” and “TV” menus
respectively. (p. 32)
●
About broadcasting systems
Analog (NTSC):
Conventional broadcasting
Digital (ATSC):
Program that allows you to view more channels featuring high-quality video and sound
TC-L50EM5_EN.indb 15TC-L50EM5_EN.indb 15 8/29/2012 1:54:52 PM8/29/2012 1:54:52 PM