Filter
Top Products
16
Watching TV
OK
SLEEP
I
N
P
U
T
OPTION
Turn power on
(TV)
or
(Remote)
Note
●
Please select correct input
I
N
P
U
T
(p. 19)
Select a channel number
up
down
or
■
To directly enter the digital channel
number
When tuning to a digital channel,
press the button to enter the minor
number in a compound channel
number.
• Also available side [CH] button on the unit.
example: CH15-1:
For Cable/Satellite box connection
- Use your connected box’s remote control.
Note
●
Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu to switch the signal
reception between cable TV and antenna (p. 27).
●
The channel number and volume level remain the same even after the TV is turned
off.
■
Other Useful Functions
Listen with SAP (Secondary Audio Programming)
■
Select the Audio mode for watching TV
Digital mode
Press [SAP] to select next Audio track (if available) when receiving a digital channel.
Audio track
English (Main Audio)
(example)
Analog mode
Press [SAP] to select the desired Audio mode.
• Each press of [SAP] will change the Audio mode. (“Stereo” / “SAP” / “Mono”)
●
SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
●
Contact your Cable or Satellite operator for instructions on enabling SAP with their box.
Closed Caption
■
Press [CC] to cycle through the Closed Caption modes
Digital TV:
• “Off ” / “Service1 - 6”
Analog TV:
• “Off ” / “CC1 - 4” / “TEXT1 - 4”
●
The selected mode is only set for the program you are watching at the moment.
●
Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.
●
Contact your Cable or Satellite operator for instructions on enabling CC with their box.
●
Closed Caption settings are memorized in “Closed caption” of “Setup” menu.
TC-L50EM5_EN.indb 16TC-L50EM5_EN.indb 16 8/29/2012 1:54:53 PM8/29/2012 1:54:53 PM