Filter
Top Products
39
Support Information
●
Technical Information
PC Input Terminals
●
Signal Names for D-sub 15P Connector
1
678
3
9
45
10
15 14 13 12 11
2
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
Signal Name
R GND (Ground) NC (not connected)
G GND (Ground) NC
B GND (Ground) HD/SYNC
NC (not connected) NC (not connected) VD
Pin Layout for PC Input Terminal
GND (Ground) GND (Ground) NC
Input signal that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC
horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI PC
525 (480)/60i 15.73 59.94
**
525 (480)/60p 31.47 59.94
**
750 (720)/60p 45.00 59.94
**
1,125 (1,080)/60i 33.75 59.94
**
1,125 (1,080)/60p 67.43 59.94
*
1,125 (1,080)/60p 67.50 60.00
*
1,125 (1,080)/24p 26.97 23.98
*
1,125 (1,080)/24p 27.00 24.00
*
640 × 400 @70 31.47 70.08
*
640 × 480 @60 31.47 59.94
*
Macintosh13” (640 × 480) 35.00 66.67
*
640 × 480 @75 37.50 75.00
*
852 × 480 @60 31.44 59.89
*
800 × 600 @60 37.88 60.32
*
800 × 600 @75 46.88 75.00
*
800 × 600 @85 53.67 85.08
*
Macintosh16” (832 × 624) 49.73 74.55
*
1,024 × 768 @60 48.36 60.00
*
1,024 × 768 @70 56.48 70.07
*
1,024 × 768 @75 60.02 75.03
*
1,024 × 768 @85 68.68 85.00
*
Macintosh 21” (1,152 × 870) 68.68 75.06
*
1,280 × 768 @60 47.78 59.87
*
1,280 × 1,024 @60 63.98 60.02
*
1,366 × 768 @60 48.39 60.04
*
Note
●
Signals other than above may not be displayed properly.
●
The above signals are reformatted for optimal viewing on your display.
●
Computer signals that can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim
any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral devices.
TC-L50EM5_EN.indb 39TC-L50EM5_EN.indb 39 8/29/2012 1:54:59 PM8/29/2012 1:54:59 PM