Filter
Top Products
Remote Control Television Operation
BUTTON WHAT IT DOES
13
STAND-BY
The remote control button is used to turn the television into Stand-by mode. When
the television is in Stand-By it is possible to turn it back on by pressing this remote
control Power Button, the Programme Number UP Button, the Programme Number
DOWN Button or any of the direct Programme Number Buttons.
SOUND
This button allows you to change Bass, Treble, Balance, and Headphone Volume
levels. It also allows you to select different sound modes and turn the Ambience On
or Off. Please refer to page 15.
TV/AV
This button is used to switch between the normal broadcast television stations or
the AV (Audio/Video) inputs.
Press the TV/AV button then press the appropriate coloured remote control button
(whilst the options remain on screen). Each AV input has two options. Press the
appropriate coloured button again to select the alternate option.
You can adjust the volume level for each AV input individually to compensate for
different output levels from the audio sources. Please refer to page 17 for Volume
correction adjustment.
INFORMATION
This button is used to show the status information for the current Programme
position.
PROGRAMME NUMBER UP
Pressing this button selects the next higher Programme Number in sequence.
POSITION / CURSOR BUTTONS
These buttons are used with the Menu buttons to select and change features of the
television.
PROGRAMME NUMBER DOWN
Pressing this button selects the next lower Programme Number in sequence.
STTL (Subtitles)
Displays subtitles (if available). Pressing this button is the same as accessing
teletext and selecting page 801. Please refer to page 33 for further information.
EXIT
Used to close the on screen menus.
PROGRAMME NUMBERS
Programme Numbers can be accessed directly by pressing the corresponding
number(s) on the Remote Control Transmitter.
DIRECT CHANNEL SELECTION
To directly access analogue Programme Numbers, press the C Button followed by
the two digits required (e.g. C02, C28 etc).
STILL
Used to freeze the picture currently on the screen. Press again for normal viewing.
SOUND
EXIT
STILL