Filter
Top Products
DVB Setup Menu
21
The DVB setup menu provides access to DVB specific options.
Note: If DVB transmissions cannot be received clearly, the DVB setup menu may not be available.
Open the Setup menu
Move to DVB setup
Access DVB Setup menu
Move to your choice
Increase or decrease levels, set
options or access further menus
Press the EXIT button to exit
Signal Quality
Common Interface
Module *
Favourites Setup
System Update
Display Timeout
PC Connection *
Modem *
The signal quality function displays an
indication of signal quality for each DVB
programme position.
The indication is green for good signal
quality and red for poor signal quality.
The DVB system requires a good quality
signal to provide the best picture. When
viewing analogue pictures, interference such
as signal reflection from nearby buildings or
mountains causes 'ghosting', but still
provides a viewable picture. For the DVB
system, interference such as this can disrupt
the flow of data causing the picture to
appear to be made up of large blocks, or to freeze intermittently. If the picture
disappears completely, this could mean that signal quality is very poor. If this
happens often, you may need to improve your aerial system to provide a better
signal.
The Common Interface Module menu provides access to functions contained on
a Common Interface Module inserted into one of the Cl slots. These are located
at the rear of the TV. See page 42.
Allows you to select your favourite programme positions and display them as a
list in the TV Guide. See page 22.
This menu allows you to download new software to the television. See page 23.
This option allows you to set how long the information banner stays on the
screen. Select from 0 (no banner) to 10 seconds in 1 second increments.
The PC Connection menu allows you to adjust communications settings for the
SERIAL port on the rear of the TV. Please refer to page 43.
The Modem menu allows you to adjust communications settings for the Modem
port on the rear of the TV. Please refer to page 43
.
* Note: Common Interface, PC Connection and Modem functions are currently unavailable in Australia.
EXIT
Select
Access
Exit
Flicker reduction On
Geomagnetic
AV2 out Analogue
Tuning menu
Off timer Off
DVB timer lock Off
DVB setup
Teletext Top
Setup menu
DVB Timer programming Access
Select
Access
Exit
Flicker reduction On
Geomagnetic
AV2 out Analogue
Tuning menu
Off timer Off
DVB timer lock Off
Teletext Top
Setup menu
DVB Timer programming
DVB setup
Access
Select
Access
Exit
Display timeout 3 seconds
PC Connection
Modem
Common interface module
Favourites setup
System update
DVB - Setup
Signal quality
Access