Filter
Top Products
Setup Menu
17
Press the SETUP Button.
Move to your choice.
Select the option to
change, change settings
or choose another menu.
Press EXIT to leave the
Setup menu.
DVB Timer Programming
Off Timer
DVB tuner lock
DVB Setup
Teletext
Flicker reduction
Geomagnetic
AV2 out
Tuning Menu
Volume correc.
The Timer programming menu allows you to enter programme times
at which the DVB tuner must switch on, ready for recording. See
page 19.
Off timer will switch the TV off within a preset time which you can
choose from between 15 to 90 minutes in 15 minute intervals.
DVB tuner lock prevents you from accidentally changing programme
position while recording a DVB broadcast. If the TV is switched into
standby mode while DVB tuner lock is on, the DVB tuner will remain
active to ensure recording can still take place.
The DVB setup menu provides access to various specialised DVB
options. See page 21.
The Teletext option allows you to choose between FASTEXT or
LIST mode. See page 33.
Lets you control any picture movement. Set to ON to correct minor
picture movement. Set to OFF to have no flicker reduction at all.
If you notice a slight tilt to the picture or if there are coloured patches
at the corners of the screen, this feature might help to eliminate
them. See page 32.
AV2 offers you a choice of signals to send to the AV2SCART socket.
You can choose from the signals currently tuned on the Analogue or
DVB tuners, or Monitor - the picture displayed on screen.
The Tuning menu provides an entry to many other features including
Programme edit and Auto setup.
See page 24.
Volume correction (in AV mode only) allows you to adjust the volume
level of each AV input to compensate for any differences in audio
levels from external equipment.
EXIT
Select
Access
Exit
Flicker reduction On
Geomagnetic
AV2 out Monitor
Tuning menu
Off timer Off
DVB timer lock Off
DVB setup
Teletext Top
Setup menu
DVB Timer programming
Access