Panasonic TX-66PW60A Flat Panel Television User Manual


 
6
Getting Started
Connect the Aerial
The RF (Aerial) Input impedance of this television is 75. If your aerial lead is 300 ribbon (two wires
separated by a flat plastic strip) you will require a 300/75 Balun (not supplied) in order to connect your
aerial to the television.
Note:
For your safety any external aerial should be installed by a reputable qualified installer and should comply with
Australian Standard AS1417.1.
In New Zealand the installation should comply with International Standard IEC597-1.1.
Connect the Power Plug
The televisions are designed for the Australian Standard Mains Voltage of 240V 50Hz and the New Zealand
Standard Mains Voltage of 230V 50Hz.
NOTE:
If the television is not going to be used for an extended period, remove the power plug from the wall outlet.
Turn on the Television
Push the Power Switch to turn the television ON. Sit back and enjoy your new Panasonic television.
Power Switch