Filter
Top Products
43
R
OLLER
G
UIDE
M
ENU
O
PERATIONS
TV Output
This menu lets you set the RF output of the Digital Satellite Receiver to either CH 3 or
CH 4. You can connect the Digital Satellite Receiver to your television, even if your TV
does not have video inputs.
Procedure
r In SETUP menu, press p or q buttons to highlight TV Output.
r Press u to change the TV output settings.
r Press p or q to select CH 3 or 4.
r Press ACTION button to save the selection.
Note: Prior to adjusting this feature, make sure that your TV is set either CH 3 or 4.
TV output channel that you select in the SETUP menu should be the same as
the television.
Monitor
System Test
Access Card
Sat Setup
TV Output
Press to change TV output settings.
Channel 4
Warning: Television must be
set to the selected channel!
TV Output Screen