Panasonic TZ-DBS01 Satellite TV System User Manual


 
6
I
NFORMATION
ON
THE
DIRECTV D
IGITAL
S
ATELLITE
R
ECEIVER
Information on the DIRECTV Digital Satellite Receiver
Reception capability of DIRECTV Digital Satellite Receiver
The Panasonic Digital Satellite Receiver is capable of receiving DIRECTV
®*
digital
satellite signals and converting them to standard definition signal. You may connect a
terrestrial or cable antenna to the VHF/UHF ANT input of the Digital Satellite Receiver.
Terrestrial off-air signals or unscrambled cable-service signals can be passed through
the Digital Satellite Receiver when the antenna is connected to the VHF/UHF IN input
and the Digital Satellite Receiver is Off or when the user presses the TV/SAT button
on the remote. The desired channels are tuned by the television.
Panasonic DIRECTV Digital Satellite Receiver Model TZ-DBS01
Panasonic Digital Satellite Receiver with a built-in DIRECTV Receiver, can receive
and process DIRECTV standard definition video from satellite broadcasts if you
subscribe to DIRECTV
®
programming. Model TZ-DBS01 uses specially developed
chips which allow current televisions (with A/V inputs) to display digitally broadcast
programs. This Digital Satellite Receiver also has a RF OUT jack, which enables the
unit to be hooked up to a television without A/V inputs. The Digital Satellite Receiver,
which receives digital signals, has the ability to convert the digital broadcast into
National Television System Committee (NTSC)** signals that a conventional television
can display.
*
DIRECTV and the Cyclone Design logo and Advanced Program Guide are trademarks of DIRECTV, Inc.,
a unit of Hughes Electronics Corp., and are used with permission.
**NTSC is the current television system used in the U.S. It uses analog (non-digital) signals.
TV OR MONITOR
SATELLITE
DISH ANTENNA
ANALOG
TERRESTRIAL
ANTENNA
DIGITAL SATELLITE
RECEIVER
TERRESTRIAL
ANTENNA
DIRECTV
SATELLITE
DIRECTV
SATELLITE
CABLE SIGNAL
Oval dish