Filter
Top Products
9
I
MPORTANT
N
OTES
Antenna/Cable Connection
A terrestrial antenna or cable antenna may be connected to the VHF/UHF IN jack of
the Digital Satellite Receiver. This input works as a passthrough. The VHF/UHF
channels can be passed through either by toggling TV/SAT button on remote control
or by turning the Digital Satellite Receiver off. The RF output (VHF (SAT) UHF OUT)
of the Digital Satellite Receiver must be connected to the television.
Antenna Connection
For proper reception of VHF/UHF channels, a directional antenna is required. For best
reception, an outdoor antenna is recommended.
Procedure
r Connect the antenna cable from your antenna to the VHF/UHF IN jack of the Digital
Satellite Receiver.
Cable Connection
Before connecting your cable to the Digital Satellite Receiver, contact your local cable
provider and ask the following question:
• Do you need a separate cable box to receive cable channels in your area?
Procedure
r Connect the cable wire provided by your local cable provider.
Incoming Cable from
Home Antenna
75 Ohm ANT IN input on back
of Digital Satellite Receiver
Incoming Cable from
Cable Provider
75 Ohm ANT IN input
on back of Digital Satellite
Receiver