Pelco C623M-C DVR User Manual


 
C623M-C (3/05) 27
EXITING TO WINDOWS OPERATING SYSTEM
Some of the steps involved in the configuration of a DX8000 Series DVR require exiting to the operating system.
To exit the DX8000 application and log into the Windows operating system:
1. Go to File > Exit.
2. Select Exit to Windows. The Shut down dialog box opens.
3. Click OK.
Figure 19. Shut Down Dialog Box
The Log On to Windows dialog box opens.
4. Enter the Windows password and click OK. The system logs you into the Windows operating system.
NOTE: You must have Power User or Administrator access to shut down the DX8000. Refer to the Operation/Programming manual for
information on user security levels. You must also have a Windows password to exit from the DX8000 application to the Windows
operating system. For information on the Windows default password, refer to the Important Security Information for System
Admisnistrators guide.