Pelco dx4000 DVR User Manual


 
14 C2601M-A (6/06)
Operation
Refer to the DX4000 Operation manual for details on how to access the system features and navigate the menus. The operation manual is
located on the resource CD that came with your unit.
STARTING AND STOPPING THE DX4000
Press the power button on the front panel of the DX4000 to start it. The first time you start the DX4000, you must log on as the administrator.
For future sessions, you can log on as any of the users after you configure the system.
To start the DX4000
1. Press the power button on the front panel of the DX4000 if it is not already running. The Setup screen appears and the Administrator user
is selected.
2. Press the numbered channel buttons to enter the default password (1234), and then press the Enter button.
Figure 8. Logging In as the Administrator
To stop the DX4000
1. Press the power button on the front panel of the DX4000. The unit beeps and displays the Shutdown screen.
2. Press the numbered channel buttons to enter your password, and then press the Enter button. The unit shuts down all attached devices and
then turns off.
Figure 9. Shutting Down the DX4000