Philips 100Hz TV CRT Television User Manual


 
59
TROUBLESHOOTING
CARE AND CLEANING
WARNING Concerning Stationary Images on the TV
Screen:
Do not leave stationary or letterbox images on screen
for extended periods of time. This can cause uneven
picture-tube aging.
Normal use of the TV should involve the showing of pictures
that contain constantly moving and changing images that fill the
screen. Be careful not to leave nonmoving images on screen for
extended periods of time, or to display the same images on
screen too frequently, because subtle ghost images can be left
on the picture tubes. Sources of stationary images may be DVD
disks, laser disks, video games, CD-i disks, videotapes, digital
television boxes, broadcast channels, cable channels, satellite
channels, and others. Here are some examples of stationary
images (this is not an all-inclusive list; you may encounter
others in your viewing):
DVD menuslistings of DVD disk content
Letterbox black barsshown at the top and bottom of the
TV screen when a wide screen (16:9) movie is viewed on a
TV with standard (4:3) aspect ratio.
Video-game images and scoreboards
Television station logospresent a problem if they are
bright and stationary; moving or low-contrast graphics are
less likely to cause uneven aging of the picture tube
Stock-market tickerspresented at the bottom of the TV
screen
Shopping channel logos and pricing displaysbright
and shown constantly or repeatedly in the same location on
the TV screen.
PLACEMENT OF THE TV
To avoid cabinet warping, cabinet color changes, and
increased chance of set failure, do not place the TV where
temperatures can become excessively hot; for example, in
direct sunlight or near a heating appliance.
Be sure to allow a free flow of air to and from the perforated
back cover of the set.
CLEANING
To avoid possible shock hazard, be sure the TV is unplugged
from the electrical outlet before cleaning.
Regularly dust the TV with a dry, nonscratching duster to
keep the TV clean.
When cleaning the TV, take care not to scratch or damage the
screen surface. Avoid wearing jewelry or using anything
abrasive. Do not use household cleaners. Wipe the front
screen with a clean cloth dampened with water. Use even,
easy, vertical strokes when cleaning.
Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool, clear water and a mild soap
or detergent. Use a clean, dry cloth to dry the wiped surfaces.
Occasionally vacuum the ventilation holes or slots in the back
cover of the set.
Never use thinners, insecticide sprays, or other chemicals on
or near the cabinet, as they might cause permanent marring
of the cabinet finish.
No Power
Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
Check that the outlet is not on a wall switch.
Be sure the fuse is not blown on the AC power strip, if one is
being used.
No Picture
Check antenna connections. Are they properly secured to the
TV's ANT 75plug?
Check the TUNER MODE control for the correct tuner set-
ting.
Try running the Auto Program feature to find all available
channels.
Press the Source Select button on the remote to make sure
the correct signal source is selected (FRONT or Current
Channel).
No Sound
Check the VOLUME buttons.
Check the MUTE button on the remote control.
If you’re attempting to hook up auxiliary equipment, check
the audio jack connections located on the front of the TV.
Remote Does Not Work
Make sure the correct Mode button is being used.
Check the batteries. If necessary, replace them with AA
Heavy Duty (Zinc Chloride) or Alkaline batteries.
Remote Does Not Work (Continued)
Clean the remote control and the remote control sensor win-
dow on the TV.
Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
Be sure the fuse is not blown on the AC power strip, if one is
being used.
Check to be sure the TV outlet is not on a wall switch.
TV Displays Wrong Channel or No Channels Above 13
Repeat channel selection.
Add the desired channel numbers (using the CHANNEL
EDIT control) into the TV’s memory.
Check to be sure the TUNER MODES are set to the CABLE
option and run the Auto Program feature to find all available
channels.
TV Displays white lines in letterbox when viewing a
DVD disc
Some DVD Discs are encoded with as much as 30% more
video information to give the best possible picture quality.
With the DVD Player in the 16:9 picture format, the play-
back of this type of disc with extra video information, can
produce a number of small white lines in the upper portion
of the black letterbox area. With some of these discs, this sit-
uation is unavoidable and it does not require a service call.