Filter
Top Products
Custom colour
Allows you to customise the ambilight colour.
< Select Palette to select the general colour of the light
output.
< Select Saturation to adjust the colourfulness of the light.
Separation
Allows you to define the stereo effect in case, Relaxed,
Moderate or Dynamic has been selected in the Mode menu.
< Select Off for a mono behaviour which means that all lamps
will behave equally.
< Select Minimum, Medium or Maximum to define the
Ambilight stereo effect spread over the available lamps.
Balance
Allows you to adjust the colour and level of light intensity
on the left and right side of the picture.
When the TV is switched off, the ambient lights will also be
switched off.When the TV is in standby mode, ambilight can
be used to provide a unique ambience for the room.
< Press the Ambilight key on the remote control to switch
between Ambilight On or Off. See Use of the remote
control, p. 6.
< Press the
MODE key repeatedly to toggle through the
Ambilight modes.
Enjoy Ambilight (Continued)
EN
22
Note: only available when Custom has been selected in
the Colour menu.
Note: when the TV is switched to standby, and you switch
Ambilight On, then less Ambilight modes are available.
Caution: Infrared interference
To avoid bad infrared remote control reception, place your
peripheral equipment out of sight of the ambient lights of
your TV. Ambilight does not function well when the room
temperature is less than 59°F/15°C.
Ambilight in standby mode
Settings assistant
Reset to standard
Picture
Sound
Ambilight
Info
TV menu
TV settings
Ambilight
.............
Mode
Colour
Custom colour
Separation
Balance
Downloaded From TV-Manual.com Manuals