The Electronic Programme Guide shows you detailed
information about the current programme and also about the
next programme (only for TV programmes that provide EPG
information).
1. Press the a key.
> The EPG screen appears. Dependent on conditions it
may take some time to acquire EPG data.
> The EPG screen updates automatically if the EPG data is
acquired successfully. If not, the EPG screen remains
blank.
> Information about the selected programme appears.
< Use the coloured keys to activate the available EPG features
displayed at the bottom of the screen.
2. To quit the Programme Guide page, press the a key again.
When the type of Electronic Programme Guide
available, displays a list of TV programmes:
1. Use the cursor up/down to select a desired TV programme.
> Information about the selected programme appears.
When the All channels list is displayed or selected you may filter
the list and select a list with only the TV channels or a list with
only the radio channels.
1. Press the
FAV key.
> The last selected channel list appears.
2. Press the cursor left.
3. Select the All channels list and press the cursor right.
4. Press the red colour key to filter.
5. Select your desired channels list.
6. Press the
FAV key again to exit.
> With the
–P+ key you will be able to browse through
the TV channels of the filtered list.
Create your favourite channels list (Continued)
EN
36
Note: these instructions may differ according to the type of
Electronic Programme Guide.
Note: the filtering will not be remembered after the TV is
switched off or set to standby.
To select only TV or only radio channels on the All
channels list
a
a
EPG (Electronic Programme Guide)
(only with Digital TV channels)
Tips:
- the EPG screen will not include TV channels which are
not in the Preferred channel list or which are uninstalled
(See Rearrange menu).
- new added channels (via reinstallation or installation) will
have to be marked in the preferred EPG channel list
before you can see EPG data.
Downloaded From TV-Manual.com Manuals