Filter
Top Products
Set code/Change code
This allows you to set or change the personal 4-digit access
code that is used in the different lock functions of the TV.
< Select Set or Change code.
> If no PIN-code exists yet, the menu item is set to Set
code. Follow the instructions on screen.
> If a PIN-code has previously been entered, the menu
item is set to Change code. Follow the instructions on
screen.
< Enter your code with the digit keys.All number
combinations from 0000 to 9999 are valid numbers.
> The Features menu reappears with a message confirming
that your PIN-code has been created or changed.
On timer
From standby, this automatically switches the TV to the
specified channel number, at a specified time.
1. Select On timer.
2. Press the cursor right to enter the On timer menu.
3. Select Timer and press the cursor right.
4. Select On.
5. Select Channel and then the TV channel you want your TV
to switch to on a selected time and day
6. Select Day and then a day of the week or select Daily.
7. Select Time and enter the time with the digit keys or with
the cursor up/down.
8. Press the
OK key to activate.
9. Press the cursor left to return to the Features menu or
press the
MENU/BROWSE key to switch off the menu.
Adjust feature menu settings (Continued)
EN
25
Info
TV menu Features
.............
Sleeptimer
Childlock
Set/Change code
On timer
Common interface
Demo
TV settings
Features
Installation
Exit
Note: From now on, every week, your TV will
automatically switch to the selected channel, on the
selected day, at the selected time, until the On timer
function is switched off again.
Note: only one On timer can be set.
Downloaded From TV-Manual.com Manuals