Filter
Top Products
E ’To record press STANDBY’ will appear on
the screen. If you have programmed a recording that
should start within the next few minutes, confirm with the
STANDBY m button. If you have programmed a recording
that will start at some later point in time, confirm with the
OK button.
DA programmed recording can only start, when the
machine is switched to standby.
DIf you entered the wrong date for a daily/weekly
recording, your TV-VIDEO Combi will correct it
automatically.
g If you have confirmed with the OK button, use the
TIMER k button to exit the menu.
DThe programming information has been stored in a
TIMER block.
h Make sure that the cassette you have put in can be
recorded on.
How to check or change a TIMER
a Press the TIMER k button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
P rB or AP q button and confirm with the
SqC button.
c Select the TIMER you want to check or change with the
P rB or AP q button and confirm with the OK
button.
d Select the entry field with the DSr or SqC
button.
e Change any information with the P rB or AP q
button or with the 0-9 buttons.
DUnder ’LP’, use the P rB or AP q button to
select the recording speed ’SP´ or ’LP´.
f Confirm with the OK button.
g To end, press the TIMER k button.
h Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a Press the TIMER k button on the remote control.
b Select the line ’Timer programming’ with the
P rB or AP q button and confirm with the
SqC button.
c Select the TIMER you want to clear with the P rB or
AP q button.
d Press the CLEAR button.
e Switch off with the TIMERk button.
19