Filter
Top Products
Switching the On-screen display (OSD) on
or off
You can switch the On Screen Display of the current operating
information on or off.
a Press the MENU button. The main menu appears.
b Select the line ’Setup’ with the P rB or AP q
button and confirm with the SqC button.
SETUP
Clock brightness BRIGHT
Parental control OFF
Display MAX
Format 16:9 NORMAL
ã Exit:
press MENU
c Select the line ’Display’ with the P rB or
AP q button.
d Select one of the options indicated with the SqC or
DSr button.
’MAX’: The OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’MIN’: The OSD is reduced to a minimum.
’PROGR.’: The programme number is always shown.
’COUNTER’: The tape position is always shown.
e Confirm with the OK button.
f To end, press the MENU button.
DWith the OK button you can superimpose the On
Screen Display of current operating mode on the TV
screen.
Switching to 16:9 wide screen picture
If you are using a cassette with 16:9 wide screen recordings,
you can switch this function ’ON’. The TV-VIDEO Combi will
now automatically switch to wide screen.
a Press the MENU button. The main menu appears.
b Select the line ’Setup’ with the P rB or AP q
button and confirm with the SqC button.
SETUP
Clock brightness BRIGHT
Parental control OFF
Display MAX
Format 16:9 NORMAL
ã Exit:
press MENU
c Select the line ’Format 16:9’ with the AP q or
P rB button.
d Select one of the possibilities with the SqC or
DSr button.
’NORMAL’ : Normal size picture.
’EXTEND.’ : Extended size picture.
’COMPR.’ : 16:9 format picture.
DWhen you watch TV you can select between
’EXTEND.’ and ’NORMAL’.
e Confirm with the OK button.
f To end, press the MENU button.
22