Filter
Top Products
Allocating a decoder
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
a Choose the TV channel on which you wish to use the
decoder with the AP q or P rB buttons on the
TV-VIDEO Combi or the number buttons 0-9 on the
remote control.
b Press the MENU button on the remote control. The main
menu will appear.
c Select the line ’Installation’ with the P rB or
AP q buton and confirm with the SqC button.
d Select the line ’Manual store’ with the P rB or
AP q button and confirm with the SqC button.
e Select the line ’Decoder’ with the P rB or
AP q button.
MANUAL STORE
Channel/Frequency FREQU.
TV system PAL BG
Search 125
Fine tuning (,,,,n=,,,,$
Name edit xxx
Programme number 01
Decoder OFF
Exit:
press MENU
f Select function ’ON’ with the DSr or SqC
button. When you select ’OFF’, the function will be
switched off.
g Confirm with the OK button.
h Press the MENU button.
Your decoder has now been allocated to this TV channel.
i To end, press the MENU button.
Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the P rB or
AP q button and confirm with the SqC button.
c Select the line ’Manual store’ with the P rB or
AP q button and confirm with the SqC button.
MANUAL STORE
Channel/Frequency FREQU.
TV system PAL BG
Search 125
Fine tuning (,,,,n=,,,,$
Name edit xxx
Programme number 01
Decoder OFF
Exit:
press MENU
d In the line ’Channel/frequency’,select the
display for:
’FREQ.’: frequency
’CCH’: channel
’SCH’: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’Searching’
with the digit buttons 0-9 .
DIf you don’t know the frequency or channel of the TV
channel of your choice, press the SqC button to
start the channel search.
f In the line ’Programme number’ select the
programme number you want e.g.: ’01’, using the
DSr or SqC button.
g If you want to change the TV channel name, press the
SqC button in line ’Edit name’.
E Select the character you want to change with the
DSr or the SqC button. Change the character
with the P rB or the AP q button. Select the next
character in the same way.
E To confirm the information, press the OK button.
6