Filter
Top Products
Update software via USB
1 Go to www.philips.com/support to check if the latest software version is available for this
product.
2 Download the software onto a USB flash drive.
3 Insert the USB flash drive to the USB jack of the rear panel.
4 In the Home menu, select [Settings] > [Advanced Setup] > [Software Download] > [USB].
5 Follow the instructions on the TV screen to confirm update operation.
Once software update is complete, this product automatically turns off to standby. »
6 Disconnect the power cord for a few seconds and connect again to turn on this product.
Note
Do not turn off the power or remove the USB flash drive when software updating is in progress to •
prevent possible damage of this product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners available commercially, or anti-static sprays •
intended for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement.
8 Specifications
Note
Specification and design are subject to change without notice •
Video
Signal system: PAL / NTSC•
Composite video output: 1 Vp-p (75 ohm)•
HDMI output 480p, 576p, 720p, 1080i, 1080p, 1080p24•
Audio
2 Channel analog output•
Audio Front L&R : 2 Vrms (> 1 kohm)•
Digital output: 0.5 Vp-p (75 ohm)•
Coaxial•
HDMI output•