Filter
Top Products
19
EasyLink Setup
1 Press .
2 Select [Settings], then press OK.
3 Select [EasyLink Setup], then press .
4 Select an option, then press OK.
5 Select a setting, then press OK.
To return to the previous menu, press •
BACK.
To exit the menu, press •
.
[EasyLink]
This product supports Philips Easylink which uses
the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
• [On] - Turn on EasyLink features.
• [Off] - Disable EasyLink features.
[One Touch Play]
When you press the STANDBY
button to turn
on this product, the TV (if the TV supports one-
touch play) automatically turns on and switches to
the video-in channel. Disc play starts if there is a
disc in this product.
• [On] - Turn on one-touch play feature.
• [Off] - Disable one-touch play feature.
[One Touch Standby]
When you press and hold the STANDBY
button
on the remote control, all the connected HDMI
CEC devices (if the device supports one-touch
standby) switch to standby mode simultaneously.
• [On] - Turn on one-touch standby feature.
• [Off] - Disable one-touch standby feature.
Note
You must turn on the HDMI CEC operations on the TV/•
devices before you can enjoy the EasyLink controls. See
the TV/devices manual for details.
Philips does not guarantee 100% interoperability with all
•
HDMI CEC compliant devices.
[Parental Control]
Restrict access to discs that are unsuitable for children.
These types of discs must be recorded with ratings.
To access, enter your last set password or ‘ 0000’.
Note
Rated discs above the level you set in • [Parental Control]
require a password to be played.
The ratings are country-dependent. To allow all discs to
•
play, select ‘ 8’ for DVD-video and BD-Video.
Some discs have ratings printed on them but are not
•
recorded with ratings. This function has no effect on
such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to
protect the TV screen from being damaged due to
over exposure to static image for being too long.
• [On] - Set the screen saver active after 10
minutes of inactivity (for example, in the pause
or stop mode)
• [Off] - Disable screen saver mode.
[Change Password]
Set or change the password.
1) Press the Numeric buttons to enter the
password or your last set password. If you forget
the password, enter ‘ 0000’, then press OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confi rm] in the menu and press OK.
[Display Panel]
Select a brightness level of the front panel display.
• [Normal] - Normal brightness.
• [Dim] - To dim display.
[Auto Standby]
Turn on or off auto standby mode. It is an energy
saving feature.
• [On] - Switch to standby after 30 minutes
of inactivity (for example, in pause or stop
mode).
• [Off] - Disable auto standby mode.
[VCD PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
• [On] - Display the index menu when you load
a disc for play.
• [Off] - Skip the menu and start play from the
fi rst title.
English
EN