Filter
Top Products
English
24
Getting Started (continued)
Modifying Channel Information
You can set a TV channel to your
preference and improve the reception
and the sound quality of the TV channel.
A Press SYSTEM-MENU.
The system menu appears.
B Use ST keys to highlight
{ System
Menu - Channel Setup } and press X.
C Use ST keys to highlight { Modify
Channel Information } and press OK.
The channel menu appears.
Channel
Scan mode
Frequency
TV System
NICAM
Audio
OK
Frequency
PAL B/G
Name
On
OK
DUAL A
Off
Skip
Fine-tune
P001/Ch003
55.26MHz
Cancel
Decoder
No
D Use ST keys to select one of the
options and press OK.
{ Name }
You can use the numeric keypad 0-9
to select the channel preset number
which you wish to change.
– Use ST keys to change alphabet/
number and use W X keys to select
different entry elds, then press OK to
con rm.
{ Scan Mode }
Select TV channel search mode based on
channel allocation or frequency.
– Use ST keys to select { Channel },
{ S-Channel } (Special Channel) or
{ Frequency }, then press OK to con rm.
{ Frequency }
Shows the frequency of the current TV
channel.
– If required, use W X keys to start the
automatic frequency search and press
OK to con rm.
{ TV System }
Set the TV system that produces the
least distortion of picture and sound.
– Use ST keys to select a suitable sound
mode, then press OK to con rm.
(See chapter “TV System Guide” at the
back of this manual for more information).
{ NICAM }
Turn on or off the digital sound
transmission system which improves the
sound quality of the TV channel.
– Use ST keys to select { On } or
{ Off }, then press OK to con rm.
{ Audio }
For bilingual TV programmes, you can
switch between stereo (original) and
additional audio language.
– Use ST keys to select { Dual A } or
{ Dual B }, then press OK to con rm.
{ Decoder }
If you have connected the DVD recorder
to an external decoder, select { On } and
press OK to con rm.
{ Skip }
Select this to set the channel to be
skipped.
The skipped channels can only be
accessed by pressing the corresponding
number button on the remote control.
– Use ST keys to choose { Yes } if you
wish to skip this channel, then press OK
to con rm.
{ Fine Tune }
Select this to ne-tune the TV channel
manually if the reception is poor.
– Use W X keys to adjust the frequency.
E Once complete, select
OK
in the
menu and press OK to con rm and exit
to the previous menu page.
If you do not wish to save any
changes, select
CANCEL
and press OK.
TIPS: Press W to go back to previous menu item.
Press SYSTEM-MENU to exit the menu.
1_dvdr3305_EU_Eng10.indd 241_dvdr3305_EU_Eng10.indd 24 2005-10-31 2:53:34 PM2005-10-31 2:53:34 PM