Filter
Top Products
English
29
Recording (continued)
Manual recording
Use this feature to start recording
immediately (e.g., to record a TV show
already in progress).
REC
SOURCE
STOP
REC
A Turn on the TV power. Select the
correct Video In channel at the TV.
B Insert a recordable DVD±R/±RW into
the DVD recorder.
C Press REC SOURCE on the remote
control to select { Tuner }, then use
ST keys to select the TV channel you
wish to record.
OR
To record from an external device, press
REC SOURCE repeatedly to select the
external channel that you wish to record
from.
{ Front CVBS }
Input source from the device connected
to the VIDEO and AUDIO L/R sockets
on the front panel.
{ Front S-Video }
Input source from the device connected
to the S-VIDEO and AUDIO L/R sockets
on the front panel.
{ EXT 1 }
Input source from the device connected
to the EXT1 TO TV-I/O scart socket on
the back panel.
{ EXT 2 }
Input source from the device connected
to the EXT2 AUX-I/O scart socket on
the back panel.
D Press REC
to start recording.
The recording will automatically start
after the last recording on the
DVD±R/±RW.
E To stop the recording, press STOP
.
Pausing a recording
A During a recording, press
Å
.
You can use this function to avoid
recording commercials.
B To resume recording, press REC
.
One Touch Recording -
automatic turn-off
A Follow the steps A~C of “Manual
Recording” on page 29.
B Press REC
twice to start a 30 minutes
recording. Each time you press REC
after that, you will add 30 minutes to the
recording time.
The recorder will stop recording at
the designated end time and turn off
automatically.
Press STOP
if you wish to stop the
recording.
TIPS: Ensure that there is suf cient space available on the DVD±R/±RW before recording.
You have to nalise the DVD±R before it can be played on other players, see page 36.
1_dvdr3305_EU_Eng10.indd 291_dvdr3305_EU_Eng10.indd 29 2005-10-31 2:53:35 PM2005-10-31 2:53:35 PM