Filter
Top Products
English
51
DVD System Menu Options (continued)
Video Output Format
The colour system of the DVD system,
DVD and TV should match. Only then
will it be possible to play a DVD on this
system. Before changing the TV system,
determine the colour system of your TV.
A In ‘System Menu-General’, use ST keys
to select { Video Output Format } and
press OK.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
B Use ST keys to select a setting and
press OK to con rm.
Helpful Hint:
– If a blank/ distorted TV screen appears,
wait for 15 seconds for the auto recovery.
Restore Factory settings
This will restore all the settings of this
DVD Recorder, except for the PIN code.
Restore Factory settings can only be
changed when there is no disc in the
disc tray.
A In ‘System Menu-General’, use ST keys
to select { Restore Factory Settings }
and press OK.
A warning message will appear.
B Select
OK
in the menu to proceed or
CANCEL
to abort, then press OK to
con rm.
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
1_dvdr3305_EU_Eng10.indd 511_dvdr3305_EU_Eng10.indd 51 2005-10-31 2:53:39 PM2005-10-31 2:53:39 PM