Filter
Top Products
English
16
17
Connecting the audio cables
This connection enables you to listen to
the sound.
Option 1: Using an Audio cable
You can connect the recorder to a two
channel stereo system or receiver in
order to enjoy the stereo sound system.
l
Use the supplied audio cable (red/white
ends) to connect the AUDIO OUT[L,
R] jacks to these devices with the same
input jacks.
Step 1: Basic Recorder Connections (continued)
Option 2: Using a Coaxial cable
You can connect the recorder to an AV
amplier/receiver in order to enjoy
multichannel surround sound.
l
Use a coaxial cable (not supplied) to
connect the AUDIO OUT
[COAXIAL] jack to the digital input on
the AV amplier/receiver with a digital
multichannel sound decoder.
Before you start operating, set the audio
settings accordingly (see page 65.)
If the AUDIO settings do not match your
amplier’s capabilities, the amplier may
produce a strong, distorted sound or no
sound at all.
Helpful Hint:
– Do not connect your TV’s audio output
jacks to the AUDIO L/R (IN-EXT) jacks
on this recorder, this may cause unwanted
noise.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
DIGITAL IN
AV ampli er/
receiver
Option 1
Option 2
DIGITAL IN
AV ampli er/
receiver
L a b e l o n r e a r p a n e l
L
R
SL CENTER
SR SUBW
Step 1: Basic Recorder Connections(only for DVDR3435H)
Option 1: Using an Audio cable