Filter
Top Products
20
English
21
RF
S-VIDEO
OUT
IN
AUDIO
R L
VIDEO
CABLE
SATELLITE
ANTENNA
Back of a Cable
Box or Satellite
Receiver (Example
only)
VIDEO
IN
OUT
IN
AUDIO
L
AUDIO
R
VIDEO
OUT
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
S-VIDEO
Back of a VCR
(Example only)
Front Panel of
HDD recorder
Step 2: Optional Connections (continued)
D
Use the supplied audio/video cables to
connect the VIDEO/AUDIO IN jacks
on the recorder to the matching
VIDEO/AUDIO output jacks on the
Cable Box/ Satellite Receiver.
E
Use the audio/video cables to connect
the VIDEO/AUDIO OUT on the
recorder to the matching VIDEO/
AUDIO input jacks on the TV.
F
Use another set of audio/video cables to
connect the VIDEO IN/L-AUDIO-R
jacks on the front panel of the recorder
to the to the matching VIDEO/AUDIO
output jacks on the VCR.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power
outlet.
Step 2: Optional Connections (continued)
B
Connecting a camcorder to
the front jacks
You can use the front jacks to copy
camcorder recordings. These jacks are
located behind the ap on the right hand
side and provides convenient connections
for a camcorder.
Option 1: Using the
DV IN jack
Use this connection if you have a Digital
Video or Digital 8 camcorder. The DV
jack conforms to the i.LINK standard.
It provides the best picture quality.
l
Use an i.LINK 4-pin cable (not supplied)
to connect the DV IN jack on the
recorder to the appropriate DV OUT
jack on the camcorder.
Before you start operating, press DV/
USB on the remote to select ‘DV’ as the
input channel. For recording, see pages
27~37.
Helpful Hints:
– The DV IN jack does not support a
connection to a Personal Computer.
– It is not possible to record from the
recorder to your camcorder via the DV IN
jack on your recorder.
Option 2: Using the S-VIDEO In or
VIDEO In jack
Use the S-VIDEO connection if you have a
Hi8 or S-VHS(C) camcorder. It provides
good picture quality.
Alternatively, you can use the VIDEO
connection if your camcorder has only a
single video output (Composite Video,
CVBS.)
A
Connect the S-VIDEO or VIDEO jack
on the front panel of the recorder to the
corresponding S-VHS or Video output
jack on the camcorder.
B
Use an audio cable (red/white ends) to
connect the AUDIO L/R jacks on the
front panel of the recorder to the Audio
output jacks on the camcorder.
Before you start operating, press
SOURCE on the remote control
repeatedly to select ‘FP-CVBS’ or ‘FP-
SVIDEO’ as the input channel, depending
on your connections. For recording, see
pages 33~34.
DV OUT
L
R
A
OR