Filter
Top Products
English
37
Record TV Programme (continued)
Automatic recording from
Satellite Receiver
The feature is only applicable for the
Satellite Receiver (or any similar devices)
that is connected to the EXT2-TO VCR/
SAT scart socket of this recorder. In
addition, the Satellite Receiver must have
a timer function that is able to control
the recording function of this recorder.
Before you start ...
Ensure that the { SAT recording }
mode in the recording setting is set to
{ On }.
A Use the Satellite Receiver’s timer
programming function to program the
recording (refer to the Satellite
Receiver’s user manual).
Each recording can be programmed up
to 6 (six) hours.
B Turn off the Satellite Receiver to standby
mode.
C Turn off the recorder to standby mode.
Leave the recorder and Satellite
Receiver in standby mode for the
recording.
The recorder starts recording when it
detects a signal from the Satellite
Receiver.
Helpful Hint:
– The recorder’s timer recordings take
priority over automatic satellite recording.
Automatic Satellite recording stops if the
recorder’s timer recording is due to start.