Filter
Top Products
English
58
Setup Menu Options (continued)
Sound settings (underlined options are the factory default settings)
Digital Output This setting is only required if you are using this recorder’s COAXIAL
OUT socket to connect other audio/video device.
{ Off } – Selects this to deactivate the digital audio output. For
example, if you use the AUDIO OUT sockets to
connect this recorder to a TV or Stereo system.
{ All } – Selects this if the connected device has a built-in
Multi-Channel decoder that supports one of the
multi-channel audio format (Dolby Digital, MPEG-2).
{ PCM only } – Selects this if the connected device is not capable of
decoding multi-channel audio. The system will
convert the Dolby Digital and MPEG-2 multi-channel
signals to PCM (Pulse Code Modulation).
Analogue Output This setting is only required if you are using this recorder’s AUDIO OUT
L/R sockets to connect other audio/video device.
{ Stereo } – Selects this to hear the sound from the left and right
audio channels. Use this setting when this recorder is
connected to a TV or Stereo system.
{ Surround } – Selects this if the connected audio/video device is
compatible with Dolby Surround. Dolby Digital and
MPEG-2 multi-channel are mixed to a Dolby
Surround-compatible two-channel output signal.
Night Mode This mode optimises playback of sound at low volume. High volume
outputs will be softened and low volume outputs are brought upward to
an audible level. This feature is only available for DVD video discs with
Dolby Digital mode. Press OK to select:
– Turns on night mode.
– Disables night mode feature. Select this to enjoy the
surround sound with its full dynamic range.
dvdr3300H_eu_eng_17223d.indd 58dvdr3300H_eu_eng_17223d.indd 58 2005-10-19 4:16:42 PM2005-10-19 4:16:42 PM