Philips FTR9964 TV Receiver User Manual


 
22
Connect Accessory Devices
See the separate supplied instruction manual with your monitor.
Connect your computer
& Connect your camera or camcorder to the front input behind the
door at the front side of your receiver. Press the center of the
door to open.
é Connect the equipment to VIDEO IN 2 and AUDIO L 1 for
mono equipment.
For stereo equipment also connect AUDIO R 1.
S-VHS quality with an S-VHS, Hi-8 or Digital camcorder is
obtained by connecting the S-VHS cables with the S-VHS input 3
(instead of
VIDEO IN 2) and AUDIO inputs 1.
Camera & camcorder
S•VHS
VIDEO IN
AUDIO
L
R
1 2
3
& Insert the plug into the headphone socket L behind the door at
the front side of the receiver. Press the center of the door to
open.
é Press ¬ on the remote control to switch off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 2000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
SOUND menu select Headphone volume to adjust the
headphone volume.
Note:When a TV channel or external source is blocked via the Channel
Lock menu (see p. 14), also the headphone is muted.
When Dual Screen/PIP is activated (see p. 17):
- if the main screen displays a TV channel picture, you hear the sound
from the Dual Screen/PIP picture through your headphone;
- if the main screen displays a picture from an external source, you hear
the sound from the main screen through your headphone.
Headphone
L
1009.4 gb 08-07-2002 11:06 Pagina 22