Filter
Top Products
24
Connect Accessory Devices
Equipment connected to the rear or to the front side of the receiver box
Press the
SOURCE SELECT button repeatedly to select AV1, AV2,AV3,AV4,AV5,
FRONT or VGA, according to where you connected your devices at the rear or the
front side of your receiver.
Press the OK button to confirm.
Remark : Most equipment (decoder, video recorder) carries out the switching itself.
This is however never the case with a computer connected to the VGA input.
If you want to change to TV channels?
Enter the channel number of the TV channel which you want to watch with the
digit buttons.
To select connected devices
Only available when a VGA source has been connected and activated. See also the
separate supplied instruction manual with your monitor.
& Select VGA with the SOURCE SELECT button.
é Press the MENU Ï button to switch on the VGA menu.
“ Select one of the menus with the cursor left/right.
Note: Only when you have chosen the US English language, the menu items will be
displayed with additional icons.
‘ Select one of the menu items with the cursor up/down.
See the separate booklet supplied with the monitor.
( Press the cursor left/right to alter the selected adjustment.
§ Press the Ï button again to switch off the VGA menu.
VGA menu
S
S j
lq
Q
CBL
INFO
+
DNR VCR Prog EXIT
NATURAL
MOTION
TV
SOURCE
SELECT
SOURCE
SELECT
VCR AMP
POWER
SATHD DVD
CC
CD
a
Picture 1
G Brightness,
H Contrast,
è Color temperature,
@ Sharpness,
Picture 2
q Format,
Z Zoom,
 Zoom factor,
~ Shift,
q Clock frequency,
fi Phase
Sound
V Volume,
Setup
‡ Language,
Picture 1 Picture 2 Sound Setup
VGA
1009.4 gb 08-07-2002 11:06 Pagina 24