Philips FTR9964 TV Receiver User Manual


 
25Record
To record S-VHS quality, connect an S-VHS peripheral directly to the VCR.
Record a TV program
You can record a TV program using your VCRs tuner without affecting your TV.
& Select the channel number on your VCR.
é Set your VCR to record.
See the handbook for your VCR.
Switching channel numbers on your TV does not disturb recording !
Record to VCR from
VIDEO OUT
You can record a program on your VCR from the TV tuner via VIDEO OUT.
& Switch on the device.
é Select the correct channel on your TV and the correct input on your VCR.
Set your VCR to record.
You record the tuner channel of the TV, even when you switch to an AV input using the
SOURCE SELECT button on the
remote control.
Do not switch channels or turn off your TV when you are recording through
VIDEO OUT.
Note:When a TV channel or AV source is blocked because of a rating set via the Channels menu (see p. 14), also the record output
picture and sound are muted.
Record with your VCR
Most of the audio and video devices from our range of products can be
operated with the remote control of your TV.
Press the
VCR, DVD, SAT, HD, CD, CBL or AMP button according to the
devices you want to operate with this remote control. See Use of the
remote control, p. 5.
VCR buttons
After you pressed the
VCR button, press one of the VCR buttons under the
door of the remote control:
® for record,
C VCR timer,
º for pause,
Ò for rewind,
for stop,
π for play,
for fast forward,
- CH + for sequential channel selection from the video recorder
tuner,
0 to 9 to select a channel number from your video recorder tuner,
These buttons function with devices that uses the RC5 signalling standard.
VCR Control buttons
213
546
879
0
S
q
Ï
TV
SOURCE
SELECT
POWER
CBL VCR AMP
HD SAT DVD CD
CC
¬
VOL CH
l Q
DNR VCR Prog EXIT
NATURAL
MOTION
INFO
+
OK
MENU
SURF
a
VCR
®
Ò†
‡π
1009.4 gb 08-07-2002 11:06 Pagina 25