Filter
Top Products
54
Hiding chapters
Initially, all the chapters are visible. You can hide chapters for playback
(e.g. unwanted scenes) or make them visible again. In editing mode,
hidden chapters are shown darker.
A chapter always consists of a start marker and an end marker.
To hide a certain scene, proceed as follows:
1 Search the beginning of the scene you want to hide. Press
PAUSE 9 .
Favorite Scene Selection
Inserting chaptermarker Press OK
Current chapter visible
Delete chapter marker
Delete all chaptermarkers
New index picture
Divide title
Press EDIT toexit
2 Press EDIT on the remote control to call the 'Favorite Scene
Selection' editing menu.
3 Set the start marker using OK .
P The number of chapters ('C') in the menu line will increase by
one.
4 Search for the end of the scene.
O You can also use O or N to search faster for the end of
the scene.
Make sure that you do not jump into the next title (title
number 'T' must not change).
O Only chapters within a title can be hidden.
5 Press PAUSE 9 at the corresponding position.
6 Set the end marker with OK . This will also be the start marker of
the next chapter.
P The number of chapters ('C') in the menu line increases by
one.
a The number of chapters ('C') has increased by two or more
numbers
b This is the case when you want to hide a chapter that, due to
automatic chapter numbering (if switched on), stretches over two or
more chapters. In this case, you must delete the start of the
automatically generated chapter:
- Press T/C twice while the editing menu is displayed to change the
chapter number.
- Select the chapter between the new markers using B or A . Press
PAUSE 9 .
- Select 'Delete chapter marker' with B to delete the current
chapter marker. Confirm with OK . The current chapter number
decreases by one.
7 Press T/C twice to change the chapter number 'C'.
8 Select the previous chapter with B , since you are already in the
next chapter (end of the chapter is also the beginning of the next
chapter).
9 Wait until the chapter has been played and press PAUSE 9 to
stop playback.
0 Select 'Current chapter' using B or A .
A Using C select 'hidden'.
P The picture is shown darker.
Switching quickly
You can switch between show chapters ('visible') and hide chapters
('hidden') quickly and easily using SELECT .
This function is independent from the selected line.
B To end, press EDIT .
During playback this chapter will be skipped.
If the chapter is not visible, select 'visible' in step
A with C .
ENGLISH
Managing the disc contents