Philips HTS3306/F8 Blu-ray Player User Manual


 
EN - 32
[AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
If the disc has no audio language, “Not Available” will be
displayed on the TV screen.
For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
You can also change the audio setting from the play
menu. Play menu can be called up by pressing
[OPTION].
8.13. Switching Camera Angles
Some BD-videos and DVD-videos contain scenes which
have been shot simultaneously from various angles. You can
change the camera angle when appears on the TV
screen.
1. During playback, press [ANGLE].
The selected angle will be displayed on the display
bar at the top of the TV screen.
2. Use [] to select your desired angle.
3. Press [BACK ] to exit.
D Note
If “Angle Icon” setting is set to “Off”, will not
appear on the TV screen. (refer to page 37)
You can also change the angle setting from the play
menu. Play menu can be called up by pressing
[OPTION].
8.14. Black Level
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
“On” or “Off”.
1. During playback, press [OPTION] to display the play
menu.
2. Use [] to select “Black Level”, then press [OK].
3. Use [] to select your desired setting.
e.g.) Blu-ray Disc™
4. Press [BACK ] to exit.
D Note
The setting will remain the same even if the unit is
switched to standby mode.
“Black Level” is not effective under the following
conditions.
- When the picture is output from HDMI OUT jack.
8.15. Noise Reduction
Reduces the noise of the playback picture.
1. During playback, press [OPTION] to display the play
menu.
2. Use [] to select “Noise Reduction”, then press
[OK].
3. Use [] to select your desired setting.
e.g.) Blu-ray Disc™
4. Press [BACK ] to exit.
D Note
The setting will remain the same even if the unit is
switched to standby mode.
“On”
:
Makes the dark parts blacker with additional
contrast and brightness.
“Off”
:
Shows the original picture as recorded.
“On”
:
Activates noise reduction.
“Off”
:
Deactivates noise reduction.
Black Level On
Noise Reduction Off