Filter
Top Products
22
Wired connection: Enter IP address
manually
Stop getting Auto IP
1 Use an Ethernet cable to connect the unit
to the router.
2 On the unit, select [Wired (Ethernet)].
3 Press BACK on the remote control to
stop getting auto IP.
Get the IP address of the router
Consult the user manual of the router.
Or, to check for the settings of the router,
enter the IP address (e.g. 192.168.1.1) in
NP3900
Acquiring IP address...
Press <Back> to enter
IP address manually
Tip
The router may fail to assign an IP address,
Protocol) is unavailable or disabled on the
router. You may need to enter the IP address
manually, or press BACK to start re-
connecting.
Connect to the Internet
Connect to the Internet as prompted.
»
time setup is complete.
Note
Ensure that the router connects to the
Internet directly and no dial-up is required on
the computer.
2/2
Wireless (W
i
F
i
)
Wired (Ethernet)
NP3900
Internet
EN